Can You Answer These Progressively Harder Engine Questions?

By: Dave Davis
Estimated Completion Time
6 min
Can You Answer These Progressively Harder Engine Questions?
Image: da-kuk/E+/Getty Images

About This Quiz

You look like the kind of engine quiz taker who likes a challenge. Other quizzes may take you on a roller coaster when it comes to the difficulty of the questions. They start out easy, throw a couple of tricky questions in here or there, but by the time the ride is over, it smooths back out to cool down your brain. Not this one! This quiz only builds in difficulty. It's all climb, baby! Do you think you're ready to reach the top — and stay there? 

There are things that everyone knows about engines — or should, at least, because of their importance to our society. Then, there are questions that only those with an interest in the mechanical world can answer. Finally, there are questions that only those who have a true love of engines, those with oil flowing in their veins, will be able to answer. This quiz has it all. While you may breeze through the first few, don't get cocky; tougher questions are waiting for you just up the road!

 Even if you miss one (or several), keep going! This quiz is almost impossible for most people to get a perfect score, but the more you learn, the better you'll be able to do in the future. No one is born with an intimate knowledge of mechanical forces. It's a learning process, and this quiz will clue you in on where you are on that path. Are you ready? Is your brain limbered up and your knowledge of engines on deck? Then let's do this! We'll see you at the top!

4 - Cylinder
da-kuk/E+/Getty Images
Where does the combustion process take place in the internal combustion engine?
Reactor core
Oil reservoir
Crankcase
Cylinder
Correct Answer
Wrong Answer

The cylinder, also called the combustion chamber, is where the magic of the internal combustion process takes place. The air/fuel mix is taken in, compressed, combusted and cleared, and then the process starts again, many times per second, depending on how hard the engine is running.

12 - cylinder head and the engine block
milanmastracci via YouTube
True or False: The cylinder head and the engine block are the same thing.
True. It's just a matter of the mechanic's preference.
True, but "engine block" is usually used for older vehicles.
False. The engine block has more cylinders than the cylinder head.
False. They are different mechanisms.
Correct Answer
Wrong Answer

The engine block and the cylinder head are bolted together to form the combustion chamber. The cylinder head contains the top of the chamber, along with the intake and exhaust valves, while the engine block houses the pistons and the cylinder shafts, among other things. The head gasket separates the two structures.

14 - OBD-II scanner
Helpful DIY via YouTube
In the right hands, what does an OBD-II scanner do for its user?
Warns of law enforcement speed traps
Runs user-defined searches for radio stations
Uses the Force
Lets the user "speak" to the car's computer
Correct Answer
Wrong Answer

Your vehicle's On-Board Diagnostic system holds a lot of information about its operations and condition. To "listen" to it, however, you need an OBD-II scanner, which plugs into a port under the dash and gives you a readout of the data. OBD-II, by the way, is just a way of saying that this is an update from earlier, more primitive OBD systems in the early 1980s.

Advertisement

11 - crankshaft seals goes bad
Donn DIY via YouTube
Hey, it happens. When one of your crankshaft seals goes bad, what's the main symptom?
There is increased noise while running.
There's a loss of oil.
The car becomes harder to start.
Fuel mileage noticeably drops.
Correct Answer
Wrong Answer

Your crankshaft has two main seals — the front and the rear. When one of them goes bad, your car will develop an oil leak. While it's rare for the crankshaft itself to fail, these seals might need replacing from time to time. And, as we've previously discussed, engines don't do well without a proper amount of oil.

7 - V6 engine
Wiki Commons by Mr.choppers
It's only easy if you know it: What is the difference between an "inline-six" engine and a "V6" engine?
The number of cylinders
The position of the engine
One is for motorcycles, the other for cars.
The configuration of the cylinders
Correct Answer
Wrong Answer

An inline-six (or straight-six) engine is one where the cylinders are in a straight line along the crankcase, whereas in the V6 motor, the cylinders are positions in a "V" format, with three cylinders on each side. While there are inline-four engines, V4 engines are rarely used, and engines with more than six cylinders are generally in the "V" format because of length considerations.

10 - pistons crankshaft connecting rods
3alexd/E+/Getty Images
They speak different languages, but the pistons and the crankshaft work together to make the vehicle move. What allows this partnership to work?
Connecting rods
Crankshaft bushings
Tie rods
Reciprocation translators
Correct Answer
Wrong Answer

The pistons and crankshaft are connected by the logically named connecting rods. These rods are ingeniously hinged so that the linear motion of the pistons can be translated into the rotational motion that moves the crankshaft. When you "throw a rod," these are the rods in question, but that rarely happens with modern engines.

Advertisement

8 - camshaft
Wiki Commons by Draco2008
True or false: The camshaft and the crankshaft are two names for the same item.
True. The two terms are interchangeable.
True, but one is used in U.S. vehicles, while the other is used in foreign models.
False. Crankshafts are used in older cars, while camshafts are used in newer models.
False. They have very different functions.
Correct Answer
Wrong Answer

They might sound similar — and even bear a resemblance to each other — but the camshaft and the crankshaft have different functions, and your car has both of them. Camshafts are responsible for opening and closing the valves at the top of your cylinder that allow the fuel/air mix in and the exhaust gas out, while the crankshaft is part of the powertrain that ultimately turns the wheels.

28 - manual shifter
anton petukhov/Moment/Getty Images
In a car with a manual transmission, which of these parts interacts with the clutch?
Accelerator
Camshaft
Flywheel
Tappets
Correct Answer
Wrong Answer

The flywheel, attached to the crankshaft, helps to balance engine vibrations caused by the firing of the cylinders, but in vehicles with manual transmissions, it serves another role; it provides a friction surface the clutch.

5 - Piston
kevinjeon00/E+/Getty Images
Which of these car parts are moved first by the exploding fuel/air mixture?
Crankshaft
Transmission
Piston
Exhaust manifold
Correct Answer
Wrong Answer

The movement of the pistons is literally what drives the engine and the vehicle. The pistons move up and down within the cylinder. As they move up, they compress the fuel/air mix. When the mix detonates, the piston is driven down, which moves the crankshaft. The process then repeats and makes the wheels go round and round!

Advertisement

1 - Internal combustion
Cravetiger/Moment/Getty Images
Which type of engine do cars and trucks typically use?
Turbine
Radiative
External combustion
Internal combustion
Correct Answer
Wrong Answer

Automobiles use an internal combustion engine to generate power, meaning that the fuel is burned within the engine, rather than outside. A steam-powered turbine would be an example of an external combustion engine.

27 - keeps running
Cris Cantón/Moment/Getty Images
Even though it's got a gasoline engine, your car is "dieseling." What's it doing?
The exhaust smells like a big rig's.
It's getting lower gas mileage.
It's making louder sounds while running.
It keeps running after you've shut it off.
Correct Answer
Wrong Answer

When you turn the key to shut the engine down, but it seems to want to go another round, your car is "dieseling." This is usually caused by carbon build-up that keeps the cylinders hot and gives the unburned fuel a chance to ignite. It can happen if your engine is running rich (too much fuel in the air/fuel mix). It's not possessed (probably).

29 - camshaft position sensor
Thanit Weerawan/Moment/Getty Images
Which of these conditions could a faulty camshaft position sensor cause?
Your mileage is dropping.
It's difficult to start the car.
The "check engine" light can come on.
All the above
Correct Answer
Wrong Answer

The camshaft position sensor's job is to, yes, detect the position of the camshaft and relay this information to the ECU. If the computer is getting faulty information about this vital piece of data, the timing of the fuel injectors can get messed up and cause all the problems listed here.

Advertisement

6 - engine without oil
Kiyoshi Hijiki/Moment/Getty Images
We know you'd never do this, but what happens if you run an engine without oil or without enough oil?
The engine would take massive damage, and then it would seize.
The engine would run rough.
The engine would run very loudly.
Nothing. Oil is nice, but not essential.
Correct Answer
Wrong Answer

While you CAN run an engine without oil — and it probably would run loudly and roughly — the friction between the many, many moving parts would quickly take its toll. The engine would seize (lock up), and you'll probably need an engine rebuild (or a new engine).

20 - thermostat
BrokeAuto via YouTube
Which of these statements best describes the role of your engine's thermostat?
It measures oil temperature.
It blocks the flow of coolant until it's needed.
It's mercury-based, like an oral thermometer.
It controls the temperature display on your dashboard.
Correct Answer
Wrong Answer

Your engine requires a certain amount of heat to reach its optimal operating condition, so when it's first started, it needs a bit of heat to build up. The thermostat opens when that temperature is reached, allowing coolant to flow and maintain that heat level. When a thermostat goes bad — either stuck open or stuck closed — your cooling system won't function properly.

19 - Mass air flow sensor
MrRangerZr1 via YouTube
Just as the oxygen sensor detects how much oxygen is going out after combustion, which of these devices tells the ECU how much air is entering the engine?
Intake valve
Release valve
Mass air flow sensor
Vent stabilization sensor
Correct Answer
Wrong Answer

While the throttle controls how much air is coming into the engine, the mass airflow sensor informs the ECU of that volume. When this sensor gets dirty or contaminated, it can throw bad information to the computer that can harm performance.

Advertisement

25 - Nitrous oxide
BRANDY BRANDNER via YouTube
One of these substances can make your car go faster for a short period of time — which one is it?
Hydroxide
Iron oxide
Nitrous oxide
Dihydrogen monoxide
Correct Answer
Wrong Answer

Nitrous oxide — known as "NOS" in racing circles — is a chemical that, when introduced to the combustion chamber, adds more oxygen to the mix, which allows more fuel to be burned. More fuel = more horses. "Dihydrogen monoxide," just to be clear, is a fancy name for water.

3 - Horsepower
kledge/E+/Getty Images
This is a powerful question: Engine output is often measured by which unit?
Foot-pounds
PSI
MPG
Horsepower
Correct Answer
Wrong Answer

The way it's calculated is often complex, but the automotive industry generally rates its engines by using the horsepower measurement. The vague definition is, of course, the power that a horse gives while pulling. The technical measurement is 550 foot-powers per second or 745.7 watts.

2 - 4 strokes combustion cycle
3alexd/E+/Getty Images
How many strokes, or stages, does the automobile engine have in its combustion cycle?
Two
Four
Six
18
Correct Answer
Wrong Answer

The automotive internal combustion engine has four strokes, or stages, of the combustion cycle: intake (bringing in the fuel/air mix), compression (squeezing the gas down to its lowest volume), power (where the mix is detonated) and exhaust (where the spent gasses are expelled).

Advertisement

17 - heater core
speedkar99 via YouTube
Its obvious task is "to heat," but where does the heater core actually send heat?
To the passenger compartment
To the radiator
To outside vents
To the oil reservoir
Correct Answer
Wrong Answer

Heat is a byproduct of the internal combustion process, and if not drawn away from the engine, it would quickly lead to overheating. While this excess heat is generally sent to the radiator by way of coolant, in cold weather, the driver can activate the heater core to warm the cabin and power the defroster. When activated, some of the hot coolant is diverted to the heater core and its warmth is put to good use.

24 - Serpentine belt
Allstate via YouTube
The alternator, power steering pump and air conditioner are all connected by what device under your hood?
Serpentine belt
Fan belt
Timing chain
Camshaft
Correct Answer
Wrong Answer

The serpentine belt connecting many of the structures under the hood replaces a multitude of belts that older engines used. The trade-off, however, is that if this belt breaks, many of your systems will suddenly go out at the same time. The next time you're in the garage, have this belt checked by a mechanic if your engine has a few miles on it.

22 - piston rings are getting worn
Yaroslav Mikheev/Moment/Getty Images
If your piston rings are getting worn, which phase of the four-stroke process is suffering the most?
Intake
Compression
Power
Exhaust
Correct Answer
Wrong Answer

While it's probably affected all of them to one degree or the other, worn piston rings will most affect the compression stroke. Worn rings keep the piston from making a tight seal with the cylinder walls, and some of the air/fuel mix will escape.

Advertisement

30 - Acceleration
Bill Heinsohn/Photographer's Choice RF/Getty Images
SAT answer time! In a car, horsepower is to speed as torque is to ... ?
Acceleration
Gravity
Downforce
Distance
Correct Answer
Wrong Answer

Torque is a measurement of the rotational force your engine produces, measured in "foot-pounds," or the turning force necessary to move one pound the distance of one foot around an axis with a one-foot radius. With cars, this means that the more torque an engine produces, the quicker it will accelerate.

9 - crankshaft
Wiki Commons by 160SX
You probably know you're going nowhere without it, but can you describe the actual function of the crankshaft?
To open and close the intake and exhaust valves
To convert reciprocating motion to rotational motion
To drive the engine's cooling system
To control how fast the engine runs
Correct Answer
Wrong Answer

The pistons moving in the cylinders are going up and down in a reciprocating motion — not that helpful when you want the wheels to turn. The pistons are connected to the crankshaft, which turns this linear motion into a rotational force that the transmission can use to drive the vehicle.

21 - timing belt
Johnny5ive via YouTube
The timing belt (or timing chain) connects which two parts of your engine?
The distributor to the alternator
The crankshaft to the camshaft
The fan to the alternator
The carburetor to the fuel injectors
Correct Answer
Wrong Answer

The camshaft and the crankshaft must operate in harmony to keep the internal combustion process running smoothly, and the timing belt keeps these two vital parts of your engine in sync. In older cars, this function was performed by the timing chain; belts have taken over the job in modern vehicles.

Advertisement

33 - coolant test
Mishimoto Automotive via YouTube
You do a coolant test and find that it's brown and sludgy. Gross! What is the most likely cause of this condition?
Radiator leak
Buying poor-quality antifreeze
Oil filter rupture
Head gasket failure
Correct Answer
Wrong Answer

The head gasket separates the cylinder head from the engine block, and it also keeps various fluids flowing through the engine — in this case, coolant and oil — separate. When this gasket fails, fluids start mixing, and things stop running at peak efficiency.

16 - oxygen sensor
Juanmonino/E+/Getty Images
Every modern car has an oxygen sensor, but where in the process does it take its readings?
From the air intake
From the cabin
From the exhaust
From the wheels
Correct Answer
Wrong Answer

To get a good sense of what the proper air/fuel mixture should be, the car's ECM needs information about how much oxygen is leaving via the exhaust system. Too much oxygen in the exhaust means that there's not enough fuel in the mix. The oxygen (or O2) sensor, mounted near the catalytic converter, is what provides that bit of information.

13 - Engine Control Unit
Wiki Commons by Gnsin
Prove your high engine IQ by telling us what the ECU is on your car.
Environmental Control Unit
Engine Control Unit
Eco-Compression Unit
Electronic Configuration Unit
Correct Answer
Wrong Answer

Computers are everywhere these days, and your engine is no exception. The Engine Control Unit is the brains of your motor, taking data from various sensors located in and around the engine and controlling functions such as the fuel/air ratio to get the best out of your equipment.

Advertisement

32 - Horsepower
Marin Tomas/Moment/Getty Images
What does the equation (torque x RPM / 5,252) compute?
Gas mileage potential
Total engine electrical output
Horsepower
True miles per hour
Correct Answer
Wrong Answer

Horsepower and torque measure different things, but they are connected when it comes to engine power and output. This equation gives designers, and marketers, a handle on engine power.

18 - ignition coils
Jorge Villalba/E+/Getty Images
Don't be shocked at the answer, but how many ignition coils does the modern automobile usually have?
One per cylinder
One
10
Trick question: The modern car doesn't use ignition coils.
Correct Answer
Wrong Answer

The spark plug provides the spark that detonates the fuel/air mix in a cylinder, but the electricity used to generate that spark comes from the ignition coil. In modern vehicles, each cylinder has its own coil (or in some cases, two cylinders share a coil). In older vehicles, this was done with a distributor cap and rotors.

23 -  synthetic oil
FUNFUNPHOTO/Moment/Getty Images
Time to change your oil! Which of these is NOT a benefit of synthetic oil?
You can take longer intervals between changes.
Better viscosity performance
It's less expensive.
Not as much loss due to evaporation
Correct Answer
Wrong Answer

Synthetic oil costs more at the time of the oil change, but it does have benefits that traditional oil can't match. There are "synthetic blend" oils available that, while not offering quite the benefits of true synthetics, are cheaper as a compromise.

Advertisement

35 - electric cars
Henrik5000/E+/Getty Images
True or false: In general, electric cars can accelerate faster than gas-powered cars.
True: They have motors for each wheel.
True: The electric motor doesn't have to build up torque.
False: Gas motors release more energy more quickly.
False: Gas motors are far stronger than electric motors.
Correct Answer
Wrong Answer

Electric motors don't have to build up torque over time as gas motors do — they have inherently higher and quicker torque capabilities. Gas engines still have it over electric motors when it comes to speed, however, so while they may get off the line faster, the gas engine will still beat it down the stretch.

26 - check engine
Yaroslav Mikheev/Moment/Getty Images
Which of these is NOT a reason that the "check engine" light might come on?
Bad thermostat
Bad oxygen sensor
Loose gas cap
Bad catalytic converter
Correct Answer
Wrong Answer

Ah, the "check engine" light and its warning that SOMETHING is wrong somewhere. Add to these common reasons that you might also need to replace your mass airflow sensor or need new spark plugs, and the light becomes a riddle with many possible answers. Time to break out the OBD-II scanner. Also, just check if your gas cap isn't tight or if it's damaged — that's the easiest thing to check.

31 - spark plugs
Thinkstock/Stockbyte/Getty Images
You have a few moments in the garage and decide to take a look at your spark plugs. The electrodes have grey or tan deposits — what's that mean?
Everything is fine.
Your engine is running too lean.
Your engine is running too rich.
It's time for new spark plugs.
Correct Answer
Wrong Answer

It's normal when spark plugs that have been in service for a while have grayish or tan deposits on the sides of the electrode. When they appear black, burned, wet or oily, however, you've got an engine problem that requires further investigation.

Advertisement

15 - throttle
fotofrog/E+/Getty Images
Which of these jobs does the throttle perform?
Controls the amount of oil entering the engine
Controls the engine's air intake
Controls the amount of fuel going into the injectors
Controls the rotational speed of the crankshaft
Correct Answer
Wrong Answer

When you stomp down on the gas pedal, you're actually not controlling the gas; you're controlling the air going into the engine. It's the job of the ECM — or carburetor in older cars — to put more fuel in the system to balance the air/fuel mix going into the cylinders.

34 - Blown exhaust manifold gasket
franckreporter/E+/Getty Images
Your car is making a hissing sound, there's a vibration in the steering wheel, and your gas mileage has taken a hit. What is the most likely explanation?
Blown exhaust manifold gasket
Faulty ECU
Loose radiator cap
All the above
Correct Answer
Wrong Answer

Exhaust leaks, which can happen at the exhaust manifold gasket, catalytic converter or muffler, not only can affect the way your car performs but can also allow harmful gases, which can be colorless and odorless, into the cabin. If you suspect your vehicle has an exhaust issue, take care of it sooner than later.

You Got:
/35
da-kuk/E+/Getty Images