Quiz: Can You Identify All of These Common Tools Used by Construction Workers?: HowStuffWorks
Can You Identify All of These Common Tools Used by Construction Workers?
By: Ian Fortey
7 Min Quiz
Image: slobo / E+ / Getty Images
About This Quiz
They say you need the right tool for the right job, and that's probably true. The thing is, there are a whole lot of different jobs out there, and that means there are a whole lot of different tools — hundreds, in fact. There are tools you need for masonry and tools you need for carpentry. Plumbers have countless specialized tools, as do electricians. Glazers, welders, millwrights and dozens of others who work in different fields of construction are all going to need to make sure their toolboxes have a variety of items so that they can get any job done and get it done right. Makes sense, yeah? But you don't need to be a specialist to know what they all are or why you'd need them. There's a good chance you can recognize a whole lot of the most common tools used in construction, and you've probably used a good number of them yourself. Everyone needs to hammer a nail or cut a chunk of wood sometimes, right?
If you're confident in your construction tool identification skills, then now's your chance to show your stuff. You can probably identify the really easy ones, but can you get them all? Measure twice, cut once, and take the quiz!
Adeiladu / Construction via YouTube
Want to cut some bricks? This is the tool to do it. Can you name it?
A bolster is essentially a large, sturdy chisel with a much wider blade than a typical chisel. The cutting edge on the bolster will be wider than the brick itself and, in a skilled hand, can be used to make some stunningly accurate cuts.
Jung Getty / Moment / Getty Images
Sometimes this tool is also called a screed. What is it?
A bump cutter looks a little bit like a giant squeegee, and in some ways, that's essentially what it is. It's a hand tool used in cement work for smoothing the cement in an area, ensuring an even and level surface when you're done.
aefoto / E+ / Getty Images
Few tools are as recognizable as this indispensable item. Tell us what it's called.
A claw hammer is one of the simplest, most basic tools in the construction arsenal. Most likely, early hammers were literal rocks that people used. Proper claw hammers with the nail-pulling claw have been found dating back to the 1500s.
seksan Mongkhonkhamsao / Moment / Getty Images
Can you name this tool that will replace a screwdriver for you?
Drills are some of the oldest tools in the world, far older than many people realize. Hand drills date back 35,000 years in China. Electric drills are actually quite a bit older than you might assume as well — the first one was patented in 1889.
Thanit Weerawan / Moment / Getty Images
Which simple tool can cut through some iron, steel, PVC or tiles?
Hacksaws are specifically designed for cutting metal as opposed to a regular handsaw intended for wood. Thanks to their versatility with blades that can be easily swapped in and out, you can cut any number of hard substances with a hacksaw, from plastic pipe to ceramic tiles.
Wiki Commons by Mark Hunter
If you need more torque to get a screw into a wall, this tool could help. What is it?
An impact driver is different than a regular power drill or even a hammer drill insofar as it increases the power being delivered perpendicular to a screw or a bit. This means increased torque, like using a long wrench to loosen a bolt.
Brad Wenner / Moment / Getty Images
Do you know what to use when you need to apply a bead of sealant?
A skeleton gun is a pretty simple item but extremely useful to have around if you ever need to seal some cracks or run a bead of adhesive somewhere. The skeleton gun holds dozens of different kinds of products and offers control in laying it out.
RealPeopleGroup / E+ / Getty Images
Can you name this tool that they call a jimmy in Britain and Australia?
Crowbars go by any number of names, including pry bars, wrecking bars, pinch bars, goosenecks and more. They're also one of the most versatile tools in the world and can be used to destroy things, open crates, remove nails, pry siding, break rock, and nearly anything else you can think of that a metal bar might be good for.
sturti / E+ / Getty Images
Can't reach something? You'll need this to help you. What is it?
A ladder is an idea so simple it would likely be impossible to guess when and where it was first invented. It's worth noting, though, that there are 10,000-year-old cave paintings in Spain that depict them, so they're clearly very old.
kali9 / E+ / Getty Images
Which piece of safety gear is as important as the tools you use?
Safety goggles may not seem like much, but they are an essential part of any tool kit. According to experts, up to 90% of eye injuries could have prevented simply by wearing safety goggles.
John Howard / Photodisc / Getty Images
If you have a length of wood that needs to be cut down, you'll want to use this. Can you identify it?
Hand saws may seem a little old school and even antique, but they're pretty much invaluable. A power saw can be very useful, but a handsaw is so simple and quick to use to make a quick cut of wood you'd do well to make sure you have one in your toolbox.
alejandrophotography / E+ / Getty Images
Do you know which of these tools can tell you how long something is?
Modern tape measures are pretty convenient and simple to use because the design is simple and easy to use. Tape measures date back to Roman times when they'd use marked pieces of leather to take measurements.
Sikana English via YouTube
A perfect right angle can be made with this tool. What is it?
Mason's squares are the best tool to use when you need to lay some bricks and want a proper right angle at the corner. You lay the square down, then line up the bricks and build away.
Pramote Polyamate / Moment / Getty Images
Which tool can cut, grind and polish a variety of surfaces?
Though the name angle grinder implies it's just for grinding things, an angle grinder is handy for both sanding and cutting. Angle grinders are versatile enough to cut through all kinds of things, including steel, tile and even stone.
fotostorm / E+ / Getty Images
Another name for this tool is "bayonet saw." What else is it called?
The main strength of a jigsaw over many other kinds of saws is its ability to cut intricate shapes that other tools would never be able to pull off. That's why a jigsaw puzzle shares the name; it's the intricately cut pieces that it's referring to.
Obradovic / E+ / Getty Images
Can you identify this tool that can help you attach wood to wood in a hurry?
A nail gun is pretty much what the name implies — a device that uses the power of compressed air to shoot a nail into a surface. It works a lot faster and more effectively than just using a hammer and also works well in places where swinging a hammer just doesn't work.
Mike Tittel / Cultura / Getty Images
Which tool can cut through wood like butter?
Chainsaws are probably the most recognizable saws next to a simple handsaw. The earliest version of a chainsaw, called an osteotome, dates back to 1830. A hand-cranked tool, it was used for cutting bones.
Image Source / Photodisc / Getty Images
When you need to break through some rock, you could use this tool. Do you recognize it?
Sledgehammers are hammers that mean business. The head of a sledgehammer can sometimes weigh as much as 20 pounds and requires two hands to wield because it's just that massive.
Peter Dazeley / The Image Bank / Getty Images
Can you name this tool that can tighten and loosen all different sizes of things?
An adjustable wrench is an incredibly useful tool that has been around since about 1842. Two different inventors are actually credited with the idea, Edwin Budding and Richard Clyburn. In the UK, they call them adjustable spanners while in Australia, they're shifting spanners.
Richard Boll / Photographer's Choice RF / Getty Images
What's another name for a hex key?
Allen wrenches, also known as Allen keys and hex keys, are small, hexagonal-shaped tools for driving hexagonal sockets. The name "Allen" is actually a trademark from the Allen Manufacturing Company who made the wrenches as far back as 100 years ago.
-nelis- / E+ / Getty Images
You'll need one of these to loosen a screw with a cross-shaped slot in its head. Do you know what it's called?
The Phillips screwdriver was named for Henry F. Phillips. Phillips didn' actually invent the Phillips screw; he bought the design from John Thompson and then made it famous. Phillips screws are now the most widely used screws in the world.
Robert Lowdon / Moment / Getty Images
Which tool is sometimes called a Channellock?
Tongue-and-groove pliers have serrated jaws that can slide up and down the handle using the titular tongue and groove from the name. They were marketed way back in 1934 under the brand name Channellock, which is why they often go by that name today.
JoKMedia / E+ / Getty Images
Box cutter isn't necessarily the proper name for this tool but that's what a lot of people call them. What else is it called?
Utility knives have a utilitarian sort of name because they're good for pretty much anything. Obviously, cutting open boxes is one of the primary uses, but any cutting will do. In many countries outside the United States, they're known as Stanley knives, named after Stanley Works, the company that manufactures them.
Huntstock / Getty Images
It may not seem like this is a tool for construction, but if you're doing electrical work, you'll definitely need one. Can you identify it?
Having a flashlight handy is never a bad idea for any number of construction jobs. The obvious would be any electrical work when there is no power for other lights, but of course, any work in basements, behind walls, under stairs, and in other dark places can benefit from a little light.
duckycards / E+ / Getty Images
What does NASA make sure this is on every shuttle into space, just in case?
Duct tape and duck tape are two commonly used names for the same product, and weirdly, both are correct. The original tape was made from something called cotton duck cloth, which is where the "duck" part comes from. It changed to "duct" sometime after WWII.
Finish Carpentry TV via YouTube
Several different kinds of technology can make this tool work. Do you know it?
Stud finders are obviously meant to find wall studs, but they can do so in a variety of ways. Early stud finders used magnets in an attempt to find studs by locating the nails in them. The latest versions use a kind of radar to detect studs in walls.
Drazen_ / E+ / Getty Images
Do you know what can help you carry a heavy load?
Wheelbarrows are a simple and efficient way for one person to carry a load that would otherwise be impossible to move. They're remarkably old devices, with some of them dating back to around the year 100.
BanksPhotos / E+ / Getty Images
Another name for this tool is diagonal pliers. What else is it called?
Wire cutters are strictly speaking a kind of plier, but they're not for holding or turning like traditional pliers. Depending on where you are, they're sometimes called snips, nippers, dikes, or side cutters.
Peter M. Fisher / The Image Bank / Getty Images
Before you insert a nail or a screw into a wall, you might want to use this tool. Do you recognize it?
A bradawl looks a lot like an ice pick or a screwdriver. Its primary purpose is to allow you to punch a small hole into wood or whatever surface you're working with to act as a guide for putting in a screw or a nail.
Deco Bliss via YouTube
Which of these tools is generally used only in plumbing?
A basin wrench or sink wrench is specially designed to be used on sinks or basins. The head pivots on the handle, allowing you to get into confined spaces to work, which, traditionally, you'd find under sinks where you can't fit a regular wrench.
Jupiterimages / Stockbyte / Getty Images
When you're not sure what size nuts or bolts you have to deal with, this can really help. What is it?
A good socket set ensures that you'll always be able to find the right size socket for the job. A man named Pete Roberts sold the patent for the quick release socket set to Sears for $10,000, who believed the invention was nearly worthless before making a $44 million profit in 10 years.
Bill Oxford / E+ / Getty Images
Can you identify this tool that helps you figure out if something is level?
A spirit level is a quick and easy way to tell if something is horizontally level or vertically plumb. The spirit part of the name comes from early levels that used spirit alcohol in the little tube where the bubble was found.
Owen Franken / Photodisc / Getty Images
What is this tool that is essentially a combination of a hammer and a chisel?
A jackhammer is a quintessential construction worker tool used to break bricks and rocks into smaller, more manageable pieces. You can either power them with compressed air, an electric motor, or hydraulics.
Wonderful Wandering Topics via YouTube
A lot of people simply refer to this by the popular brand name Dremel. Do you know it?
Dremel is the maker of the most popular rotary tool. Still, there are other brands, and they're remarkably versatile as some of them can come with literally hundreds of attachments useful for sanding, grinding, smoothing, drilling, cutting and more.
RyersonClark / E+ / Getty Images
This tool both cuts and bonds metal. Can you tell us what it is?
Welding torches come in numerous different kinds with various fuels. Oxy-acetylene torches are one of the most common types, but there are many others, including MIG welding, TIG welding, ARC welding, electroslag welding and many others.
Avalon_Studio / E+ / Getty Images
If you plan to pour a floor or foundation, you might need one of these. What do you call it?
A concrete mixer, as you might expect, mixes concrete. You pour the water, sand, stones, cement mix, and whatever else you might need into the barrel, and the mixer keeps it moving, so it blends but doesn't set.
Guido Mieth / DigitalVision / Getty Images
When soil is too hard to move by hand or shovel, this tool can help. Can you name it?
A pickaxe is a pretty versatile tool for breaking up rock and hard soil, as well as tough roots and more. Long ago, people would use shed deer antlers that had formed in a similar shape for the same purpose.
Sagel & Kranefeld / Corbis / Getty Images
Can you name this tool that will help you check to see if a structure is perfectly vertical?
A plumb bob is basically just a string with a weight on end. Not the most sophisticated tool in the world, but suspending it can show you if something is perfectly straight up and down, which helps determine if you actually succeeded in making a level building.
Yaroslav Mikheev / Moment / Getty Images
Which tool do some people call a scraper or a spatula?
A true putty knife is actually a glazer's tool for putting putty around the edges of panes of glass in a window. Most people will refer to any wide, flat-bladed tool used for smoothing and scraping as a putty knife, however.
skynesher / E+ / Getty Images
Oddly enough, famed writer Franz Kafka is credited with inventing this. What is it?
Hard hats grew out of the tradition of dock workers putting tar on their heads and allowing it to cure in the sun to protect them from falling debris. Novelist Franz Kafka supposedly invented the modern version while working for the King of Bohemia.
How much do you know about dinosaurs? What is an octane rating? And how do you use a proper noun? Lucky for you, HowStuffWorks Play is here to help. Our award-winning website offers reliable, easy-to-understand explanations about how the world works. From fun quizzes that bring joy to your day, to compelling photography and fascinating lists, HowStuffWorks Play offers something for everyone. Sometimes we explain how stuff works, other times, we ask you, but we’re always exploring in the name of fun! Because learning is fun, so stick with us!
Get smarter every day! Subscribe & get 1 quiz every week.
Playing quizzes is free! We send trivia questions and personality tests every week to your inbox. By clicking "Sign Up" you are agreeing to our
and confirming that you are 13 years old or over.