Can You Name These Uncommon Garage Tools?

Estimated Completion Time
3 min
Can You Name These Uncommon Garage Tools?
Image: 10’000 Hours / DigitalVision / Getty Images

About This Quiz

You've probably swung a hammer in your day or used a tape measure to check the dimensions of a piece of furniture. Most people have used a paintbrush or roller to freshen up a room or worked with a selection of screwdrivers to assemble something or replace a few batteries. 

But what about tools that aren't quite so common? Could you recognize a wood drill if you saw one? What about a froe, hawk or nail kicker? Any idea what a cat's paw looks like, or a macaroni tool?

These uncommon tools aren't found in every garage, but you might be surprised to find out some of these unusual gizmos are hiding in your very own toolbox. Some are uncommon because they are more specialized than hammers or screwdrivers. Others are rare simply because they represent an old-school way of working -- one that's been largely replaced by modern power tools and other more efficient alternatives. These tools run the gamut from those used in carpentry, plumbing, electrical work and plain old home remodeling and repairs. 

If we show you a picture of an uncommon tool, do you think you could match it to its name? Take our quiz to find out!

Shingle froe
Wiki Commons by Nienetwiler
Can you name this tool?
Shingle froe
Scrub plane
Hand drills
Mortar hawk
Correct Answer
Wrong Answer

A shingle froe is an old-school tool used for cutting wood shingles from a log or lumber. Its name comes from a rarely used word -- froward, meaning away. To use this tool, dig the blade into the wood, then pull it toward you, shaving off a perfect wooden shingle every time.

Advertisement

Mortar hawk
Wiki Commons by Jayess
Match this unusual tool to its name.
Cat's paw
Mortar hawk
Timber scribe
Hand drills
Correct Answer
Wrong Answer

No, it's not a bird. A mortar hawk is actually a very simple tool consisting of a metal plate with a handle underneath. Workers can drop a pile of mortar on the plate and keep the mortar with them while installing brick or block.

Advertisement

Hardie
Wiki Commons by Fciron
Name the tool shown here.
Cobrahead
Paint comb
Hardie
Timber scribe
Correct Answer
Wrong Answer

A hardie is a simple blacksmithing tool. It features a square peg that fits into a hole on an anvil. The hardie holds pieces in place as they are forged and shaped by the blacksmith.

Advertisement

power chisel
CasarsaGuru / E+ / Getty Images
Choose the correct name for this tool.
Bull float
Moisture meter
Hand drills
Power chisel
Correct Answer
Wrong Answer

Not just a chisel....a power chisel. Old-school chisels require you to carefully cut and scrape wood a tiny bit at a time. A power chisel adds a motor, resulting in a much faster wood removal project.

Advertisement

hot cut
Wiki Commons by Thomas Bresson
Do you know what this tool is called?
Cat's paw
Hot cut
Bull float
Nail kicker
Correct Answer
Wrong Answer

A hot cut is aptly named. It's used by blacksmiths when cutting hot metal, as opposed to a cold cut, which is used for cutting metal after it's cool. The term hot cut can be used to describe a variety of specialty blacksmith tools, from chisels to rasps.

Advertisement

hay hook
Wiki Commons by Marion Doss
Pick the correct name for the tool shown in this image.
Hay hook
Nail kicker
Timber scribe
Bull float
Correct Answer
Wrong Answer

Have you ever tried to pick up a bale of hay? It's large and unwieldy, no matter how strong you are. A hay hook features a metal hook with a T-shaped handle that can be plunged into the bale and used to move it with ease.

Advertisement

scrub plane
Wiki Commons by Luigi Zanasi
Which tool is this?
Hewing axe
Moisture meter
Mortar hawk
Scrub plane
Correct Answer
Wrong Answer

Scrub planes are tools used to manually remove large amounts of wood from a board or rough lumber via sweeping diagonal strokes. The use of this hand tool has been largely replaced by thickness planers and other big workshop equipment.

Advertisement

Macaroni Tool
Wiki Commons by Lemongrasspicker
Do you think you can name this tool?
Paint comb
Cobrahead
Macaroni tool
Timber scribe
Correct Answer
Wrong Answer

No, it has nothing to do with making pasta. A macaroni tool consists of a handle attached to a sharp, U-shaped channel. It's used to cut grooves in or shape wood.

Advertisement

cat's paw
Wiki Commons by Ll1324
Guess the name of this uncommon tool.
Cat's paw
Scrub plane
Supersaw
Adze
Correct Answer
Wrong Answer

A cat's paw is a cool name given to a tool that resembles a miniature crow bar. It has a curved neck and a groove at one end, making it an ideal tool for removing stubborn nails.

Advertisement

paint comb
Wiki Commons by ScoutCrafter
Can you ID this unusual tool?
Macaroni tool
Bush hammer
Cat's paw
Paint comb
Correct Answer
Wrong Answer

A paint comb is like a regular hair comb, except it's used to groom paintbrushes instead of your own head. These tools are made of special alloys to resist damage from paints and chemicals while thoroughly cleaning the bristles of the brush.

Advertisement

Undercut saw
Casco Tools Inc. via YouTube
Match the tool shown here to the correct name.
Hardie
Circular saw
Undercut saw
H​ori hori
Correct Answer
Wrong Answer

An undercut saw is a power cutting tool that's incredibly compact and versatile. Designed to fit in very small, tight spaces, it's ideal for undercutting door frames or cutting materials installed in a corner.

Advertisement

Timber Scribe
Youtube by pstankiewicz66
Do you know what this tool is called?
Timber scribe
Cobrahead
Hand drill
Paint comb
Correct Answer
Wrong Answer

A timber scribe is a tool used to carve numbers or letters in wood while constructing a home or building. It tells the installers where to place each piece based on the mark carved at the end of the wood.

Advertisement

bullnose plane
Wiki Commons by Peter Sjogren
Can you ID this uncommon tool?
Paint comb
Bullnose plane
Mortar hawk
Macaroni tool
Correct Answer
Wrong Answer

A bullnose or shoulder plane features a cutting blade that sits flush with the very end of the tool itself. This makes it possible to plane all the way to the edges of a work surface, which is not possible with a standard plane.

Advertisement

Adze
Wiki Commons by Daderot
Select the correct name for this tool.
Paint comb
Hot cut
Power chisel​
Adze
Correct Answer
Wrong Answer

People have been using adzes to get the job done since the Stone Age. This tool resembles an ax or a hoe, with the blade set at a right angle to the handle. It's used to cut, shape and smooth wood.

Advertisement

Bull Float
Wiki Commons by Chief Petty Officer Yan Kennon, U.S. Navy
Try to name the tool shown here.
Bush hammer
Bull float
Mortar hawk
Macaroni tool
Correct Answer
Wrong Answer

A bull float is a tool used in concrete finishing. It may be installed on a long handle, like a broom, or equipped with a short handle on one side. After the concrete is leveled with a screed, the surface is compacted and smoothed with the float.

Advertisement

Plugging Chisel
Wiki Commons by Brayden Sullivan
Do you know the name of this uncommon tool?
Paint comb
Cat's paw
Plugging chisel
Scrub plane
Correct Answer
Wrong Answer

A plugging chisel is designed for use on mortar instead of wood. Builders use it to pull crumbled, old or damaged mortar out from between bricks and concrete blocks so they can install new, fresh mortar.

Advertisement

Bush hammer
Wiki Commons by Reiner Flassig
Do you think you know what this tool is called?
Bush hammer
Timber scribe
Cobrahead
Macaroni tool
Correct Answer
Wrong Answer

A bush hammer is a heavy-duty tool with a square head. Cones or pyramids cover one surface of the head. By swinging the hammer and striking concrete or stone, you can use this tool to add texture to these surfaces, which can improve both appearance and traction.

Advertisement

nail kicker
Wiki Commons by oatbuilder
Can you name this tool from just one image?
Nail kicker
Moisture meter
Bull float
Timber scribe
Correct Answer
Wrong Answer

Think of a nail kicker as the opposite of a nail gun. Nail kickers are tools that remove nails at the push of a button, leaving the surrounding surface largely undamaged -- unlike most other nail removal tools.

Advertisement

Whetstone
jasongillman / Piaxabay
Do you remember what this tool is called?
Hewing axe
Whetstone
Mortar hawk
Cat's paw
Correct Answer
Wrong Answer

Whetstone is a simple term used to describe a sharpening stone. Used for sharpening tools like knives, chisels and scissors, a whetstone comes in different grits to provide rough or fine finishes to the metal.

Advertisement

halligan bar
Wiki Commons by Derek Eiland
Which uncommon garage tool is this?
Tubing cutter
Hand drills
Halligan bar
Paint comb
Correct Answer
Wrong Answer

A halligan bar is a must-have tool for firefighters, police and rescue crews. These beastly looking tools make quick work of doors, walls and other obstacles that get in the way during a fire or other type of emergency.

Advertisement

Hydraulic Torque Wrench
Youtube via WindTechTv
Do you know what this tool is called?
Hydraulic torque wrench
Power chisel
Cobrahead
Macaroni tool
Correct Answer
Wrong Answer

Are you putting all your weight into your wrench and still not moving that bolt an inch? A hydraulic torque wrench is designed to handle these tough jobs, using a simple hydraulic system to loosen even the toughest bolts.

Advertisement

Part washer
Wiki Commons by Apached
Pick the correct name for the tool shown in this image.
Whetstone
Macaroni tool
Nail kicker
Parts washer
Correct Answer
Wrong Answer

If you spend a lot of time working on cars, a parts washer is a must. This tool removes grease and grime to not only make parts look better, but also function better together after installation.

Advertisement

Hook and pick set
Wiki Commons by Chris Mitchell
Do you know the name of this uncommon tool?
Whetstone
Cat's paw
Hook and pick set
Hay hook
Correct Answer
Wrong Answer

A hook and pick set reaches in spaces that are too small for your fingers. They are useful for all kinds of work, and are designed to pick up and position screws that are too small or too hidden to reach by hand.

Advertisement

Sticker scraper
Youtube by Toni Pieleanu
Can you name this tool?
Sticker scraper
Timber scribe
Macaroni tool
Plugging chisel
Correct Answer
Wrong Answer

You know that gunk that gets left behind when you try to peel a sticker off a piece of glass or other object? A sticker scraper is designed to remove both label and adhesive from stickers on windows, cars and building materials.

Advertisement

Telescoping magnetic pickup tool
Youtube by Catus Maximus
Do you know what this tool is called?
Laminate cutter
Mortar hawk
Telescoping magnetic pickup tool
Angle driver
Correct Answer
Wrong Answer

You're trying to replace the panel on your furnace or water heater. You're down to the last screw -- and you fumble and drop it down into the nether regions of your basement, where it is lost forever. That is, unless you have a telescoping magnetic pickup tool -- a slim metal device that can reach down into tiny crevices and recover lost fasteners. It's also super helpful if you drop something magnetic down a drain and need to recover it.

Advertisement

Angle driver
Wiki Commons by National Institute for Occupational Safety and Health
Do you remember what this tool is called?
Angle driver
Timber scribe
Cat's paw
Hay hook
Correct Answer
Wrong Answer

Have you ever found yourself trying to drill something in a space too small for a standard drill? An angle driver is designed just for jobs like this, including installing and removing screws in tight spaces.

Advertisement

laminate cutter
Youtube by QEP Company
Which uncommon garage tool is this?
Magnetic wristband
Tubing cutter
Power chisel
Laminate cutter
Correct Answer
Wrong Answer

Laminate flooring recreates the look of wood or tile for a fraction of the cost. Unlike standard materials, laminate is fairly easy to cut without the use of a power saw. Instead, pick up a laminate cutter, which looks like a giant paper cutter​ but is designed to create smooth cuts in laminate flooring.

Advertisement

Laser level
Wiki Commons by Jensens
Guess the name of this uncommon tool.
Laser level
Cat's paw
Whetstone
Adze
Correct Answer
Wrong Answer

You've seen levels with their floaty air bubbles. But what if you could make this tool even cooler by adding lasers? Laser levels make layout or picture-hanging easy​ and come in models that shoot a single line of light as well as more advanced units that can shoot half a dozen lines or more at the same time.

Advertisement

magnetic wristband
Youtube by Cool Tools
Match the tool shown here to the correct name.
Hand drills
Magnetic wristband
Adze
Cat's paw
Correct Answer
Wrong Answer

If you're like most people, you only have two hands. So, how are you supposed to hold a tool, hold what you're working on in place, and keep track of tiny fasteners? A magnetic wristband keeps screws safely in place on your wrist so you can grab only the one you need.

Advertisement

spill plane
Wiki Commons by Ezrimerchant
Can you name this tool from just one image?
Whetstone
Mortar hawk
Cobrahead
Spill plane
Correct Answer
Wrong Answer

A spill plane, or taper plane, is a truly old-school tool. It's designed to cut spirals or tapers in wood, which are then used to move a fire from one spot to another. This tool dates back to the days before matches were cheap and plentiful.

Advertisement

Moisture meter
Wiki Commons by Wagner Meters
Do you think you can name this tool?
Moisture meter
Cat's paw
Scrub plane
Macaroni tool
Correct Answer
Wrong Answer

Water can wreak havoc on a home. A moisture meter detects moisture levels in wood, concrete and other building materials to keep moisture at bay and prevent issues with mold and rot.

Advertisement

point spacing tool
Wiki Commons by Justin Bongard
Which tool is this?
Timber scribe
Point spacing tool
Adze
Bull float
Correct Answer
Wrong Answer

A point spacing tool is a surprisingly simple way to install objects on a wall at the desired spacing or distance from one another. This collapsible tool allows you to mark nailing locations, and is useful for hanging things like pictures and coat hooks,

Advertisement

mortorq screw
youtube by joe beermaster
Select the correct name for this tool.
Hay hook
Macaroni tool
Mortorq screw
Moisture meter
Correct Answer
Wrong Answer

A mortorq screw is aptly named. It's built to provide more torque than a standard screw. It looks like a Phillips screw, but has wider wings and a sturdier construction, making it appropriate for automotive and aerospace applications.

Advertisement

Hori hori
Wiki Commons by Arthur Violy
Choose the correct name for this tool.
Hori hori
Power chisel
Cobrahead
Hand drills
Correct Answer
Wrong Answer

A hori hori is a multi-purpose knife used by gardeners. It has two sharp edges and a sharp point, making it perfect for weeding, digging or dividing plants.

Advertisement

Tubing Cutter
Wiki Commons by Tommy Halvarsson
Name the tool shown here.
Cat's paw
Mortar hawk
Tubing cutter
Macaroni tool
Correct Answer
Wrong Answer

A tubing cutter is a specialty tool designed to easily cut lengths of metal or plastic pipe. It provides a cleaner cut than a hacksaw, and is totally portable for use on a job site.

Advertisement

Miter Snips
Youtube by Tileasy
Can you ID this uncommon tool?
Sticker scraper
Magnetic wristband
Timber scribe
Miter snips
Correct Answer
Wrong Answer

Forget setting up the miter saw -- miter snips provide a more convenient way to get the job done. Mitering cuts are angled cuts used on things like paneling and molding. Snips allow you to make the cuts so that the trim or molding lines up perfectly at corners and joints.

Advertisement

one way screws
Wiki Commons by Scott Ehardt
Match this unusual tool to its name.
Whetstone
Mortar hawk
One-way screws
Tubing cutter
Correct Answer
Wrong Answer

You can't use a standard screwdriver to remove one way screws, making them ideal for public spaces and restrooms, where you wouldn't want anyone tampering with screws. They require a special extraction tool for removal.

Advertisement

cobrahead
Youtube by National Gardening
Try to name the tool shown here.
Cobrahead
Adze
Cat's paw
Paint comb
Correct Answer
Wrong Answer

A cobrahead is a multi-purpose gardening tool. It consists of a hooked metal digger attached to a long handle and can be used for anything from weeding to planting.

Advertisement

hand drills
Gellinger / Pixabay
Can you ID this unusual tool?
Nail kicker
Timber scribe
Hand drills
Macaroni tool
Correct Answer
Wrong Answer

Before the power drill, carpenters relied on hand drills to cut holes in wood. Today, these tools are still used in precision applications, like art and furniture building.

Advertisement

Hewing axe
Wiki Commons by LittleGun
Do you think you know what this tool is called?
Bush hammer
Power chisel
Moisture meter
Hewing ax​
Correct Answer
Wrong Answer

A hewing ax is designed to take wood from round to square by flattening the sides of logs. It's a popular hand tool for building log cabins, timber framing or rail ties.

Advertisement

You Got:
/40
10’000 Hours / DigitalVision / Getty Images