Do You Know the Reason for These Common Auto Maintenance Services?

By: Justin Cupler
Estimated Completion Time
6 min
Do You Know the Reason for These Common Auto Maintenance Services?
Image: 1001nights/E+/Getty Images

About This Quiz

Car ownership is a long-term arrangement where you promise to take care of this machine as long as it continues to reciprocate by giving you lifts wherever you need to go. If you fail to live up to your end of the bargain, your car will forgive you for a while, but the eventual lack of maintenance will catch up and make the car give up on you. 

Car owners often forget about their responsibilities when owning a car, expecting it to be ready to go the second they turn the key. Without regular maintenance, though, the wear on your vehicle's moving parts can lead to complete failure and leave you stuck hailing a cab or grabbing a bus until you save the money you need to fix your mistake. 

Do you know why your car needs all that maintenance listed in the back of the owner's manual? Is this all just a brainwashing tactic to get you back into the dealership to spend money? No, there are specific reasons for each regularly scheduled maintenance item. Think you have a bead on why you need to perform each maintenance item? Take this quiz to see just how much you actually know about automotive maintenance. 

Why do you need to change the engine oil in your car?
Oil lubricates and cleans the engine's moving parts, and it all the heat and debris eventually breaks it down.
Because oil goes bad over time, like milk.
To increase fuel economy
Because it fuels our vehicles.
Correct Answer
Wrong Answer

Oil has several key functions, including lubricating moving parts and washing away contaminants. Over time, the heat from the engine breaks down the oil's viscosity and the contaminants become too dense for the oil, causing it to lose its effectiveness. This is when it's time to change the oil.

Advertisement

What happens if you do not change your oil filter?
It will damage the engine.
It can reintroduce contaminants or even clog.
The filter will eventually expand and leak.
The filter will become too heavy and fall off.
Correct Answer
Wrong Answer

The oil filter removes all the contaminants from the oil as it flows back through the engine. If left unchanged, these contaminants can eventually become too much for the filter to handle and can flow back into the engine. In severe cases, the filter can even become clogged and cut off the flow of oil to the engine.

Advertisement

Why do tires need to be rotated?
It changes the angle and rotation of the tire to help even out tire wear.
It keeps your car driving straight.
Allows you to line up all the names on the tires
It prevents vibrations.
Correct Answer
Wrong Answer

Each corner of your vehicle has a slightly different angle for your vehicle's tire to sit at. Leaving it in this angle for too long can cause premature wear. Rotating the tires ensures you constantly change the way the tire contacts the road.

Advertisement

If you do not rotate your tires, what will happen?
Your wheels may fall off.
You could blow out your tires.
You will get excessive wear in one area of the tires.
You will damage the suspension.
Correct Answer
Wrong Answer

Leaving your tires in the same spot on the vehicle will also leave them contacting the road at the same angle, which is never exactly perpendicular to the road. This eventually leads to excessive wear in the spot of the tire that bears the most weight. This can dramatically shorten the life of your tires and void any warranty.

Advertisement

Why do tires need balancing?
To prevent vibration while driving
To keep all things equal
To ensure your car's weight is distributed evenly
To keep the suspension well-balanced
Correct Answer
Wrong Answer

The tire manufacturing process is an imperfect one that results in natural heavy spots in the tire. Balancing the tire counters these heavy spots with small wheel weights. If you do not balance your tires, the vehicle will shake at certain speeds and potentially cause damage to the chassis.

Advertisement

Why is it important to inspect and replace belts regularly?
They are inside the engine and hard to replace.
To keep fuel economy at its peak
A broken belt can leave you stranded on the side of the road or even cause severe engine damage.
So your air conditioner runs efficiently
Correct Answer
Wrong Answer

Belts are often out of sight and out of mind, but checking them frequently can catch early cracking that can result in sudden breakage if left unchanged. Your car's accessory belts power the alternator and, in some cases, the water pump and fan.

Advertisement

What makes brake fluid go bad?
Bugs are attracted to it and land in it.
Oil gets into the system and contaminates it.
It simply breaks down over time.
It absorbs water.
Correct Answer
Wrong Answer

Brake fluid is hygroscopic, which means it absorbs water from the surrounding atmosphere. This water can impact its ability to function properly and result in brake system damage or failure.

Advertisement

What can happen if you do not replace your car’s brake fluid?
Air can get into the lines, or the brake components can rust.
The brakes will squeal.
Premature brake pad wear
Warped rotors
Correct Answer
Wrong Answer

Brake fluid absorbs water from the atmosphere, and water will lower the brake fluid's boiling point. This can result in the fluid boiling and introducing air into the system or damaging the rubber seals within the system. Water can also cause the brake line and components to rust from the inside.

Advertisement

Why do we need to replace engine coolant?
Loses its heat-absorption and lubricating qualities
It's what the owner's manual says.
It will start to leak.
You really don't need to .
Correct Answer
Wrong Answer

Coolant goes through constant heating and cooling, which can break down its viscosity. This breakdown reduces its ability to absorb heat and lubricate the cooling system's moving parts. Changing the coolant as the manufacturer recommends will prevent these breakdowns from causing any overheating issues.

Advertisement

Why do you need to check and adjust your tire pressure?
To keep your car from bouncing too much
To prevent tire wear and damage
So the tires look even
To keep my warranty valid
Correct Answer
Wrong Answer

Tires are very sensitive to pressure, and having the pressures off can result in excessive tire wear. Always set your tires to the "Cold PSI" setting noted on the tire placard inside the door.

Advertisement

What happens if you drive with underinflated tires?
You will see excessive wear on the outer edges of the tires.
They will bulge and explode.
They will squeal all the time.
Excessive vibration
Correct Answer
Wrong Answer

Underinflated tires hold most of the vehicle's weight on their outer edges. This unbalanced weight distribution can cause excessive wear on the outer edges of the tires.

Advertisement

What happens if you drive on overinflated tire?
They will explode.
The wheels will rub.
The center section of the tire will wear quickly.
Nothing at all
Correct Answer
Wrong Answer

Overinflated tires will bulge in the center, putting most of the vehicle's weight on this part. This will cause the center portion of the tire to wear out quicker than the rest of the tire.

Advertisement

Why do our vehicles need regular alignments?
To pull the chassis back within the manufacturer's specification and prevent tire wear
To make sure the body is straight
To prevent vibrations
To keep your car's ride smooth
Correct Answer
Wrong Answer

Rough roads and normal driving slowly pull the chassis out of alignment. This causes the tires to sit at an angle the manufacturer did not intend them to and can cause excessive tire wear. Regular alignments keep the chassis within spec and prevent this issue.

Advertisement

What happens if we never align our vehicles?
The car will shake viciously.
The tires will continue wearing out at a high rate.
Nothing. Alignments are scams.
The body can warp.
Correct Answer
Wrong Answer

If you continue driving without having your vehicle aligned regularly, your tires will constantly sit at an angle the manufacturer did not intend. This will cause excessive tire wear and lead to you replacing tires more frequently than you should

Advertisement

Why are clean battery terminals better?
Easier to start the vehicle and it may run better
They look good when they are shiny.
Because they are smoother.
They allow my stereo to play louder.
Correct Answer
Wrong Answer

The battery is the heart of your vehicle. All the power runs through it and having corroded terminals interrupts the flow of power. Keeping the terminals clean allows power to flow freely, making it easier to start the vehicle, and may even run better too.

Advertisement

How do we prevent corrosion on our battery terminals?
Frequently dumping soda on them
Anti-corrosive spray
Weekly cleanings
Covering them with a cloth
Correct Answer
Wrong Answer

Auto parts stores sell an anti-corrosive spray that helps keep corrosion to a minimum while not interfering with the flow of energy . Applying this according to the instructions on the spray will help minimize corrosion and keep your battery in top shape.

Advertisement

Why is waxing your vehicle so important?
It make your car look good.
It adds a protective boundary between environmental elements and your car's paint.
Professionals say to do it.
It's really not that important.
Correct Answer
Wrong Answer

Wax adds a thin coat that protects your car's expensive paint job from all the environmental fallout in the sky. Instead of attaching to your car's paint and potentially causing pitting and other damage, the fallout lands on the wax and is easily swept away by water.

Advertisement

What can happen if you do not replace your timing belt as recommended?
Nothing. The timing belt never really needs replacing.
You may lose a little power, but the car is fine.
It can break and potentially cause major engine damage.
Your "check engine" light will stay on.
Correct Answer
Wrong Answer

The timing belt is what synchronizes your car's valves with the piston stroke. If the belt snaps, the valves can fall and contact the piston, which can cause major engine damage. Replacing the timing belt at the recommended intervals can prevent this issue.

Advertisement

Why change the water pump, all pulleys and the tensioner when replacing a timing belt?
These items contact the timing belt and can fail, causing your new timing belt to break.
You really don't need to.
Because they are all part of the belt.
Because everything looks better when it's all new.
Correct Answer
Wrong Answer

The timing belt tensioners, pulleys and the water pump all make direct contact with the belt and can wear out over time. While you have the belt off, it is best to replace these items to prevent their failure from damaging the new belt. Many timing belts come in kits that already include these parts.

Advertisement

What is the purpose of greasing front end components?
To keep the steering and suspension system lubricated
To stop squeaking
To make it easier to steer
To make the vehicle run better
Correct Answer
Wrong Answer

Many trucks and SUVs use greasable front-end components that require regular greasing. Failure to grease them regularly can cause excessive wear and eventual failure. Some of the components you need to grease include the ball joints, steering rack, steering linkage and tie rod ends.

Advertisement

What can happen if you do not grease front end components regularly?
Nothing really
Squeaking and eventual failure
It gets hard to steer.
The whole front end falls out.
Correct Answer
Wrong Answer

As front end parts run dry, they will begin to squeak louder and louder. Eventually they will rub metal against metal, which causes them to become loose and eventually fail. Best case, they fail but remain intact. Worst case, they fail and you can lose control of the vehicle.

Advertisement

Why does your engine air filter need replacing?
It will clog and not allow you engine to not breathe.
It will eventually fall apart and cause damage.
It can catch fire.
It doesn't need replaced -- it's only a recommendation.
Correct Answer
Wrong Answer

The air filter plays a huge role in keeping sand, dust, bugs and other debris out of the engine. Over time, these contaminants get caught up in the filter and clog it. If the right amount of air cannot get into the engine, it can reduce power and fuel efficiency.

Advertisement

What is the point in replacing the cabin air filter?
Without it, bugs will get inside the car.
It makes everything smell good.
It becomes clogged and restricts the flow of air through your heating and cooling ducts.
A clogged filter will kill your A/C.
Correct Answer
Wrong Answer

The cabin air filter prevents pollen, dust and other debris from entering the cabin. Over time, these contaminants build up and clog the filter. While a clog typically causes no mechanical failures, it can redistrict the flow of warm or cold air into the cabin, making it uncomfortable.

Advertisement

Why do wiper blades go bad?
They are designed to fail.
Heat and cold wreaks havoc on them.
They never really go bad.
Water damage
Correct Answer
Wrong Answer

Your car's windshield wipers catch the brunt of all the heat and cold the environment throws at your car. While these rubber blades can handle a lot of abuse, they eventually dry out and crack, which causes them to streak water across the windshield instead of wipe it away.

Advertisement

What happens if you wait too long to replace brake pads?
They can dig into the rotors and cause caliper damage.
Nothing really. As long as the car stops, you're all good.
Cause wheel damage
Damage the suspension
Correct Answer
Wrong Answer

If you wait too long to replace the brake pads and the metal backing plate of the pad contacts the rotor, this can dig large grooves into the rotor and force you to replace the rotor too. A low pad level also forces the caliper piston to overextend, which can cause the piston to become jammed, forcing you to replace the entire caliper, too.

Advertisement

What happens if you do not resurface rotors when replacing brake pads?
Nothing. Slapping on new pads is good enough.
You can damage the brake lines.
The car won't stop.
The pads can wear quickly and stopping distance may be longer.
Correct Answer
Wrong Answer

The brake pads need a rough surface to grab for maximum effectiveness, which is why we resurface rotors. Failure to resurface rotors forces the pads to grip smooth rotors or those with uneven surfaces, resulting in longer stopping distances or uneven pad wear.

Advertisement

Why should you inspect your car’s hoses regularly?
They soften over time and can burst unexpectedly.
To check their tightness
To make sure fuel flows freely
To make sure they are still there
Correct Answer
Wrong Answer

The constant heating and cooling your car's hoses go through can lead to them softening over time. As they soften, the risk of bursting increases. Catching a soft hose early can prevent them from bursting and potentially causing overheating.

Advertisement

Why do you need to lubricate the slides when doing a brake job?
It prevents calipers from sticking.
You don't need to.
It keeps them shiny.
It lets the pads move freely.
Correct Answer
Wrong Answer

The caliper slides are what allow the caliper to slide back and forth during braking. With each brake job, you need to lubricate these slides to allow the calipers to move freely. With dry slides, the calipers can stick and cause excessive brake pad wear or vibration.

Advertisement

Why does transmission fluid require changing?
It loses its ability to cool.
It get sticky.
It becomes contaminated and loses its viscosity.
It just gets old.
Correct Answer
Wrong Answer

Transmission fluid has many responsibilities: cleaning, lubrication, cooling and hydraulics. As it ages, the fluid becomes dirty and loses its ability to lubricate under high heat. Changing the fluid restores these properties and prevents damage to the transmission.

Advertisement

What can happen if you do not change transmission fluid regularly?
The fluid loses its ability to lubricate, clean and cool the transmission, causing the transmission to overheat and break down.
It turns black, but nothing bad happens.
The filter clogs.
The transmission locks up immediately.
Correct Answer
Wrong Answer

The transmission fluid has many responsibilities, so it can fail in many ways. This is why it is key to change it right on schedule with what the manufacturer recommends. Generally, when the transmission fluid becomes contaminated it initially loses its lubricating and cooling properties, which starts the downward spiral of transmission failure.

Advertisement

Why do we need to replace spark plugs regularly?
The electrodes wear out or become dirty, making the spark colder.
To keep the battery charged
To make the engine run better
To enhance fuel economy
Correct Answer
Wrong Answer

Through normal wear and tear,spark plugs lose small amounts of material from their electrodes and these electrodes collect dirt and debris. Over time, this causes the spark jumping between these electrodes to weaken, making the engine less efficient. Replacing the spark plugs at the manufacturer's recommended interval restores the hot spark.

Advertisement

Why is it important to change ignition wires along with the spark plugs?
To make the car start faster
You don't need to.
They become brittle over time and replacing them can prevent complete failure.
They just need it.
Correct Answer
Wrong Answer

As spark plug wires age, the constant exposure to the engine's heat can cause their rubber covers to become brittle and crack easily. When removing the wires from the plugs, you can break the cover without realizing it, causing a short you won't notice until after you've already installed everything.

Advertisement

Why does the oil weight matter?
It's what the manufacturer says to use.
It maximizes lubricating properties and efficiency.
Too heavy oil will weigh down the car.
Weight actually does not matter.
Correct Answer
Wrong Answer

Manufactures choose an oil weight for their engines that delivers the best combination of lubricating properties and efficiency. Straying from this weight of oil can cause decreased performance and efficiency.

Advertisement

Why does the right type of coolant matter?
Each coolant type has different additives and lubricating qualities.
You can actually run the basic green stuff in any car.
So you spend more money
The wrong one will make your car stall.
Correct Answer
Wrong Answer

Manufacturers design cooling systems with specific fluid types in mind. While many share the same fluids, there are some with specific types. These generally have different additives to extend their useful lives and lubricate the cooling system's moving parts more effectively.

Advertisement

Why is it important to inspect your tires regularly?
Their wear can sneak up on you and not rear its dangerous head until you hit bad weather and need good tires.
Tires are expensive, so checking them regularly lets you save up with plenty of time to spare.
To make sure they are still round
To make sure one is not blown out
Correct Answer
Wrong Answer

Tire wear and tear sometimes goes unnoticed until you hit bad weather and start sliding all over the place. You can catch excessive tire wear or damage before these issues arise by just taking a look at your tires and checking their tread depth once every few weeks.

Advertisement

You Got:
/35
1001nights/E+/Getty Images