The Ford Engine Quiz

By: Robin Tyler
Estimated Completion Time
4 min
The Ford Engine Quiz
Image: Pixabay / MichaelGaida

About This Quiz

One of America's great auto manufacturers, practically everybody who loves cars throughout the world has heard of Ford. Started by Henry Ford in 1903, the company quickly grew, thanks to Ford's Model T, one of the most influential cars of the 20th century, and still today the company thrives. In fact, in 2017, Ford sold around 6.6 million units worldwide.

Ford has produced some iconic motor cars over the years other than the Model T. Think of their F-Series pickup trucks ... going strong since the 1940s. And what about the GT40, a car that broke Ferrari's domination of the endurance races at Le Mans? And there are so many more.

But just as iconic as the Ford motor cars over the last century, so too are Ford engines. From humble beginnings in his kitchen, where Henry Ford built his first engine, to the modern engines today which are not only green but also economical, Ford engines are highly regarded around the world.

But just how much do you know about them? Do you know the powerplant that powered "Tin Lizzy," the Model T? Or what about the high-performance engine found the Ford F-150 Harley Davidson super truck? These and more are covered in the Ford Engine Quiz.

Let's see how well you do!


Which of these Ford engines, produced for the first time in 1932, is a favorite with hot rodders?
Flathead V8
Scorpion Diesel V8
Triton V10
Consul 4
Correct Answer
Wrong Answer

The Flathead V8 was a revelation by Ford in 1932. Quite simply put, at the time, there was nothing similar to it out there. Most importantly, it was cheap, which made it more accessible to people struggling through the Great Depression.

Advertisement

The Ford Model A was introduced by the company in 1903. What was it powered by and what was the top speed?
1668 cc two-cylinder engine, 30 mph
200 cc four-cylinder engine, 10 mph
1000 cc three-cylinder engine, 15 mph
None of the above
Correct Answer
Wrong Answer

The first incarnation of the Ford Model A was released in 1903. And technically, although it was designed by Henry Ford, the engine was in fact from Fiat. It was a 1668 cc two-cylinder gasoline engine which gave the Model A a top speed of 30 mph.

Advertisement

Henry Ford's first motor vehicle was designed in the late 1890s. Called the "Quadricycle," what propelled it?
A six-cylinder gas engine
An electric motor
A two-cylinder ethanol engine
A steam engine
Correct Answer
Wrong Answer

Henry Ford's Quadricycle wasn't anything special. It did get him into car design, however. Running on four bicycle wheels, the Quadricycle had a ethanol-powered, two-cylinder engine which produced 4 horsepower and managed a top speed of 20 mph.

Advertisement

Following on from the Model A, Ford introduced the Model N in 1906. What engine did it run?
Eight-cylinder 3.0-liter V8
Six -cylinder 2.5-liter V6
A hybrid motor system with a gas and electric engine
2,440 cc inline-4 engine
Correct Answer
Wrong Answer

The Model N was produced between 1906 and 1908. It was powered by a 2,440 cc inline-4 engine, the first four-cylinder engine produced by Ford.

Advertisement

Ford followed the Model N up with the famous Model T. Of the options below, which was the power plant for the "Tin Lizzy"?
2.9-liter inline four-cylinder
1.0-liter Ecotec engine
5.4-liter Supercharged V-8
Ford Kent Engine
Correct Answer
Wrong Answer

The first Model T's were powered by a 2.9-liter inline four-cylinder which produced 20 brake horsepower. This gave "Tin Lizzy" a top speed of around 45 mph.

Advertisement

The Model T engine was capable of running on kerosene, ethanol or _______?
Nitromethane
Gasoline
Bio-fuel
None of the above
Correct Answer
Wrong Answer

Early Model T engines were capable of running on kerosene, ethanol pr gasoline. Ethanol became too expensive so when the price of gasoline eventually dropped, it quickly became the favorite form of fuel.

Advertisement

True or false? The first 2,447 Model T engines were cooled using water pumps.
True
False
Correct Answer
Wrong Answer

The Model T's 2.9-liter straight-four engine, which at first produced around 20 bhp, was initially water-cooled. Well, the first 2,447 were. Ford then changed to cooling thermosiphon action where natural convection circulated water without the need of a pump.

Advertisement

Despite electric starters having been invented around 1911, Ford didn't immediately use them on the Model T motor. In what year did it finally arrive?
1911
1912
1919
1932
Correct Answer
Wrong Answer

The Model T engine was hand-cranked to begin with, much a like all early engines. The option of the electric starter arrived in 1919.

Advertisement

Model T engines delivered power to which set of wheels on the vehicle?
Front
Rear
All four wheels
Correct Answer
Wrong Answer

The Model T engine delivered its power to the rear wheels of the car using a planetary gear-based two-speed gearbox. Interestingly, Ford called it three-speed but that doesn't really count, as one gear was reverse!

Advertisement

How would a driver apply the throttle in a Model T?
With a lever near the steering wheel
With the pedal near their right foot
With the pedal near their left foot
None of the above
Correct Answer
Wrong Answer

In the early days of motoring, there were many configurations for brake, clutch and throttle control. To use the throttle on a Model T, the driver would adjust a lever near the steering wheel.

Advertisement

True or false? A version of the Model T, known as the Speedster, was faster than the standard car.
True
False
Correct Answer
Wrong Answer

Model T's could be customized quite a lot, depending on what the new owner wanted. For instance, a model called the "Snowflier" added skis to the front of the car in place of wheels to allow for driving in winter. And yes, there was a "Speedster" model as well which pushed out 35 bhp over the 20 bhp of the normal engine.

Advertisement

What made Ford's 1932 Flathead V8 unique over earlier V8 motors?
It was made out of aluminum.
The engine block was cast as a single piece.
It ran on bio-fuel.
None of the above
Correct Answer
Wrong Answer

It took Ford sometime to release their first V8 engine - Chevrolet had done so around 15 years earlier - but when they did in 1932, it was a massive success. It differed from other V8's as it was cast from a single piece of metal which Ford called "en block".

Advertisement

So it certainly was unique, but why was the Ford Flathead V8 so popular?
It was cheap.
It looked awesome.
Ford gave it away for the first year.
None of the above
Correct Answer
Wrong Answer

Although it had some problems - it loved to burn oil at a high rate - the Flathead V8 became very popular. And yes, it produced some great performance numbers at the time but more importantly, it was relatively cheap when put up against the V8's of other manufacturers.

Advertisement

During the early 1940s, Ford produced a different kind of engine. Can you tell us which one from the list below?
Ship engines
Tank engines
Aircraft engines
None of the above
Correct Answer
Wrong Answer

During the Second World War, Ford turned their attention to the war effort. They produced over 86 000 B-24 Liberator bombers as well as 57,000 engines under license.

Advertisement

In the late 1920s and early 1930s, Ford was involved in aviation. Around 200 Ford Tri-Motors served with a number of airlines. Did it have Ford engines?
Yes
No
Correct Answer
Wrong Answer

No. Although the company was briefly involved in aviation, the Tri-Motor did not have Ford engines. Early versions were powered by air-cooled radial Curtiss-Wright engines and later models by more powerful Pratt and Whitney engines

Advertisement

Perhaps Ford's most iconic car, other than the Model T, the Mustang was introduced in 1964. What engine initially powered the low-end models?
5.7-liter V6
2.8-liter straight six
1.2-liter straight four
None of the above
Correct Answer
Wrong Answer

The entry level models of the 1965 Ford Mustang didn't have V-power. They did have a punchy 2.8-liter straight six engine, however. It produced around 100 bhp.

Advertisement

And what was the most powerful engine put into the first generation Mustang?
4.7-liter Windsor HiPo V8
5.7-liter V6
3.2-liter V8
None of the above
Correct Answer
Wrong Answer

The 4.7-liter Windsor HiPo V8 was first introduced by Ford in 1963 and was used on their Fairlaine model. It became the most powerful engine put in the first generation of the Mustang and produced around 270 bhp.

Advertisement

In 2017, Ford released the second generation of the GT. From the option below, pick its engine, please.
FE engine
Duratec 8v PS
3.5-liter twin-turbocharged Ford EcoBoost V6
Canadian Essex V6
Correct Answer
Wrong Answer

The second generation of the Ford GT is a thing of beauty. And it is powered by a great engine as well. The 3.5-liter twin-turbocharged Ford EcoBoost V6 engine produces 647 bhp!

Advertisement

Which Ford engine in the late 1960s produced 360hp with 459lb-ft of torque?
Straight-6 226
428 Cobra Jet
300 Inline 6 Cylinder
None of the above
Correct Answer
Wrong Answer

The 428 Cobra Jet from Ford is a legendary engine from the American automaker. It was seen in a number of models including the 1968 Ford Mustang. It became known as the "CJ".

Advertisement

Ford released a "super truck" in the 1990s, the F-150 SVT Lightning. What powered it?
351 Windsor
5.8-liter V8
I-6
None of the above
Correct Answer
Wrong Answer

The SVT Lightning was introduced in 1993 and essentially is an F-150 truck with a little extra under the hood. The Lightning was powered by a 5.8 liter V8 which produced 240 bhp while handling was improved thanks to an upgraded suspension system. More powerful models followed at the end of the '90s.

Advertisement

In what year did Henry Ford make his first internal combustion engine?
1893
1896
1903
1907
Correct Answer
Wrong Answer

Ford's first internal combustion was put together in the sink of his home! It later became the powerplant to his first ever vehicle, the Quadricycle, which he built in 1896.

Advertisement

Can you identify the Ford engine made in Canada?
300 Inline 6 Cylinder
Flathead V8
Taunus V4
Canadian Essex V6
Correct Answer
Wrong Answer

Introduced in 1982, this engine was so named as it was produced in Canada at Ford’s Essex Engine Plant in Ontario. It started as a 3.8-liter displacement engine, but a 4.2-liter eventually followed for use in F-Series pickups.

Advertisement

Which of these is a diesel engine found in Ford pickups?
5.4-liter Supercharged V8
Scorpion V8
302 V8
300 Inline 6 Cylinder
Correct Answer
Wrong Answer

The Scorpion V8 is a turbo diesel engine found in Ford F-Series pickups. It is a 6.7-liter 32 valve engine. It was first introduced in 2011.

Advertisement

Can you name the engine that was not only found in cars, but tractors and agricultural equipment as well?
EcoBlue
T-88 Series
300 Inline 6 Cylinder
Zetec-E
Correct Answer
Wrong Answer

Reliable and strong, the 300 Inline 6 cylinder was a popular engine for Ford when it was first introduced in 1965. So versatile was this engine that it could be found in a range of models as well as agricultural equipment, trucks and tractors.

Advertisement

Which engine powered the Ford F-150 Harley Davidson edition, released in 2000 as an option package?
5.4-liter V8
T Inline 4
1.5 L EcoBoost I-3
Taunus V4
Correct Answer
Wrong Answer

The Harley Davidson option of the Ford F-150 was available between 2000 and 2011. It was powered by a 5.8 liter V8 which produced around 360 bhp.

Advertisement

True or false? Jaguar vehicles are currently powered by Ford engines.
True
False
Correct Answer
Wrong Answer

Yes they are. And they will be until 2020, at which point Jaguar will replace the Ford engines with power plants of their own making

Advertisement

From this list, which engine went into the Shelby Mustang GT650?
Zetec SE Sigma
Duratorq
302 V8
York
Correct Answer
Wrong Answer

Ford picked an incredible car to put the 302 Ford V8 into - the Shelby GT350! It provided not only power but reliability. A even more high-performance version went into 1969's Boss Mustang.

Advertisement

Which of these engines was produced by Ford Great Britain?
Duratec 8v PS
GAA engine
Consul 4
None of the above
Correct Answer
Wrong Answer

The Consul 4 engine was produced by Ford in the United Kingdom in the 1950s and 1960s. The 1951 engine, the first produced, had a 1.5-liter displacement and produced around 47 brake horsepower.

Advertisement

Can you tell us which of these engines is a modern Ford diesel powerplant released in 2016?
I4 DOHC
EcoBlue
Endura-E
Valencia
Correct Answer
Wrong Answer

Developed by teams in the United Kingdom and Germany, the EcoBlue was introduced in 2016 to replace the Duratorq. Two options are available, a 1.5-liter or a 2.0-liter. The top-of-the-range 2.0-liter engine, found in the Ford Ranger Raptor, produces 238 brake horsepower.

Advertisement

This engine is found in Ford's smaller, more economical models. What is it?
CHT
I4 DOHC
1.0 L EcoBoost I-3
Endura-E
Correct Answer
Wrong Answer

First introduced in 2012, the 1.0-liter EcoBoost engine is a 3-cylinder engine. It can produce an impressive 123 brake horsepower.

Advertisement

True or false. In 1929, a homebuilt aircraft, the Pietenpol Sky Scout, was powered by the Model T engine.
True
False
Correct Answer
Wrong Answer

Bernard H. Pietenpol was an aircraft designer who loved using Ford engines to power his planes. His first design, the Air Camper, used the Model A engine. But Pietenpol wanted something lighter, so in his next design, he went with a Model T engine.

Advertisement

The Ford 2300 HSC engine is found in a number of vehicles. What does HSC stand for?
High Swirl Combustion
Heavy Safety Carburetor
Heat Sink Cleaning
None of the above
Correct Answer
Wrong Answer

The 2300 HSC engine was produced between 1984 and 1994. It was found in a few Ford and Mercury models, including the Ford Tempo and Taurus.

Advertisement

Can you name Ford's range of engines that are both green and offer better fuel economy?
Kent
Windsor
EcoBoost
None of the above
Correct Answer
Wrong Answer

The EcoBoost engines from Ford are available in a range of configurations and sizes and feature across their models. Ford claims they offer 30% fuel saving while producing 15% less harmful gases.

Advertisement

Which of these engines was a product of Ford Germany?
Kent engine
Triton V10
Taunus V4
Scorpion Diesel V8
Correct Answer
Wrong Answer

A 60-degree V4 engine, the Taunus was first used by Ford in Germany in 1962. It was available as a 1.2, 1.3, 1.5 and 1.7-liter engines.

Advertisement

True or false? Although the production of the Model T stopped in 1927, its engine was produced until 1941 by Ford.
True
False
Correct Answer
Wrong Answer

A simple, cheap and reliable engine, the 2.9-liter inline four that powered the Model T was never going to win in the speed stakes. That said, after the Model T was discontinued in 1927 for the Model A, the engine carried on in production until 1941. It was used in many ways including in boats, industry and by the military.

Advertisement

You Got:
/35
Pixabay / MichaelGaida