1. 6.7-liter V8
   1.5-liter Inline-4
2. Electric motor
   2.0-liter diesel engine

Generally speaking, V8 engines — especially those with a massive displacement like 6.7-liters — are the most powerful around. They are found in all kinds of vehicles, including pickups, SUVs and muscle cars. V8s are thirsty and generally deliver poor gas mileage, however.

1. Moves oil around the engine
   Turns linear motion into rotational motion
2. Releases the gases caused by the combustion process
   Charges the battery

The crankshaft changes the linear motion of the piston stroke into a rotational one, which turns the driveshaft and makes a vehicle move. Of course, its pretty technical how it achieves this, but without it your vehicle is useless!

1. Valves
   Pistons
2. Carburetor
   Battery

In older engines, a carburetor controlled the fuel/air mixture being put into the engine. In modern engines, this is handled by fuel injectors, so there is no need for a carburetor. Carburetors began disappearing from cars in the 1980s.

1. Rotary engine
   Hybrid engine
2. 1.2-liter inline four engine
   3.5-liter V6 petrol engine

A sports utility truck, the Ridgeline was first marketed by Honda in 2005. It is currently in its second generation and is powered by a 3.5-liter V6 engine. This gives it 280 hp and 262 lb-ft of torque through a six-speed automatic gearbox.

1. John Stevens
   Thomas Edison
2. Karl Benz
   Henry Ford

Colonel John Stevens, III is credited with creating the first American internal combustion engine in 1798. He also constructed the first steam locomotive in the country, was responsible for the first steam-powered ferry, and help create the U.S. patent law. Certainly not just your average inventor.

1. Electric engine
   Steam engine
2. 2-cylinder engine
   Hydrogen engine

Henry Ford's Quadricycle ran on a two-cylinder engine that was capable of producing around 4 horsepower and of achieving speeds of up to 20 mph. The vehicle had two gears, but no reverse. Only four Quadricycles were ever made. The first is now on display at The Henry Ford Museum.

1. Oil
   Water
2. Battery
   Brake fluid

This light probably means that the oil level in the car is getting a little low. Ignoring the warning could result in your engine seizing. Oil acts as a lubricant, ensuring that metal parts within the engine do not grind against each other. Also, remember to change the oil in your car as often as the manufacturer recommends.

1. Air
   Dry Ice
2. Liquid nitrogen
   Chilled hydrogen

In air cooled-engines, moving air, caused by the vehicle traveling rushes over hot parts and cools them. Although motorcycles use this form of engine cooling, many cars have as well, for example, the Chevrolet Corvair. Air-cooled engines run hotter than their liquid-cooled counterparts.

1. Catalytic converter
   Muffler
2. Turbocharger
   Oil filter

Turbochargers are a great way to add horsepower to an engine. Essentially, they push extra oxygen into the engine which allows for the combustion process to burn more fuel, providing more power.

1. Sleeve
   Oil sump
2. Cylinder
   None of the above

Pistons are found within a cylinder. It is here where they performing various strokes, such as the intake, compression and power stroke. These all crucial in making sure the engine runs effectively and performs just as it should.

1. Power Drive
   Stovebolt
2. 'Ol Reliable
   Gas Guzzler

The Stovebolt was introduced by Chevrolet in 1929. It replaced the older straight-4 engine and was used on a variety of Chevrolet vehicles. The engine was available as a 3.0-liter, 3.2-liter or a 3.4-liter unit. The first generation of this engine was produced until 1936.

1. Karl Benz
   William C. Durant
2. Ransom E. Olds
   John Francis Dodge

It was Karl Benz who built what is considered to be the first modern motor car in 1885. He called it the Benz Patent Motorwagen. Benz produced 25 of these vehicles until 1893. They cost around 600 German marks, the equivalent of over $4,000 US dollars in today's money.

1. Connect the oil filter to the oil pan
   Connect the piston to the crankshaft
2. Connect the radiator to the fan
   None of the above

Pistons are connected to the crankshaft with connecting rods. Without them, or if the rods break, the pistons cannot move within the cylinder, and are therefore unable to perform the necessary strokes to make the engine run.

1. The Durant brothers
   The Dodge brothers
2. The Wright brothers
   The Duryea brothers

Charles and his brother J. Frank Duryea were responsible for building the first gasoline-powered vehicle in the United States. The brothers went on to form the Duryea Motor Wagon Company in 1895. By 1905, the company employed 50 workers and produced around 60 vehicles a year.

1. Industrial engine
   Rotary engine
2. Electric motor
   Hybrid engine

A Wankel engine is essentially a rotary engine with all parts rotating in the same direction. It's named after Felix Wankel, the man who invented it. It was created in the 1950s.

1. Cylinder block
   Iron block
2. Tappet
   Crankcase

The engine block is also often called the cylinder block since it houses the cylinders of the engine. Cylinder blocks can be made from cast iron or an aluminum alloy.

1. True
2. False

The engine in a Veyron is a sixteen-cylinder behemoth. It has a four-bank W configuration and produces 987 horsepower! That gives the Veyron a top speed of over 253 mph! Now that will blow your hair back!

1. 100 hours
   25 hours
2. 1 hour
   500 hours

Automation has cut down the hours it takes to make a car in today's modern world. In most circumstances, it takes just 25 hours, and that includes the complex engine as well! Much of this is due to the fact that many parts of modern vehicles are built by robots.

1. Dodge Viper
   Ferrari F50
2. Ford GT40
   Lamborghini Diablo

A Dodge Viper 8.3-liter V10 engine in a pickup? Yes, it really happened. The Ram SRT-10 was the fastest production truck at the time, completing 0-60 mph in under 5 seconds and able to reach 154 mph. And all of that power was channeled through a manual transmission!

1. Hand crank
   Jumpstart
2. Push start
   None of the above

Early vehicles had to be hand cranked to turn the engine over to get them started. Electric starters first appeared in 1912, but took some time to be fitted as a standard feature. Cranked engines could often cause injuries, particularly to shoulders as they could be difficult to turn due to compression within the engine.

1. Ford 302 V8
   1.5-liter EcoBoost
2. Windsor
   Kent

Ford picked an incredible car to put their 302 Ford V8 into — the 1967 Shelby GT350. It provided not only power but reliability. An even higher performance version went into 1969s Boss Mustang. These are fine examples of excellent muscle cars.

1. Oil level
   Battery
2. Gas tank
   None of the above

In most cases, when the battery warning indicator begins flashing on your dashboard, the battery is not receiving a charge from your alternator. This could be a result of an old, faulty battery or the alternator belt may have broken, preventing the battery from receiving a charge.

1. Daihatsu
   Nissan
2. Honda
   Subaru

VTEC stands for "Variable Valve Timing and Lift Electronic Control." First introduced in 1983 as the HYPER VTEC, it was designed by Ikuo Kajitan. VTEC technology has even been implemented in motorcycles ever since the Honda CB400.

1. The engine is running too rich and excess fuel has not been burnt.
   The oil filter is blocked.
2. You need a new air filter.
   None of the above

When your car runs too rich, the engine cannot burn all the fuel effectively. Not only is it not running in an optimum way, but you are wasting gas and losing performance.

1. Your coolant is leaking.
   The fuel filter is blocked.
2. You have a faulty glow plug.
   Your oil needs changing.

This light will come on when you start your engine, particularly in cold weather. If it stays on, it indicates that a glow plug, which helps to start and warm a diesel engine, is faulty.

1. True
2. False

Fluid is more effective at cooling things down than air. Air-cooled engines are often found in motorcycles, but also in older vehicles. The original Volkswagen Beetle made use of an air-cooled engine.

1. Peugeot
   Studebaker
2. Duesenberg
   Dodge

Dodge supplied engines at the rate of 400 per month to Ford in 1905. They also supplied transmission systems. Of course, the most famous Ford, the Model T did have a Ford engine.

1. True
2. False

Yes, it is true! An example is the BMW M5. Incredible to think that a beast of an engine like that could be so quiet. To be honest, it seems like a bit of a cop out! We prefer hearing real engines not fake sounds!

1. You are running out of gas.
   You should check the coolant levels in your radiator.
2. Oil levels are dropping.
   None of the above

Failure to see why the temperature light on your dashboard has started flashing could cause your engine to overheat, which can harm it. As soon as you see this light, pull in to your nearest gas station to ensure the radiator is filled to its proper level. Also, check that you do not have a leak of any kind.

1. Porsche
   Bentley
2. Rolls Royce
   Ford

A boxer engine features horizontally opposed pistons. Porsche has used them in a number of models over the years, specifically the Porsche Boxter. (The name is a dead giveaway!)

1. Cambelt
   Crankshaft
2. Radiator
   Fan

The movement of pistons within a cylinder is up and down. When attached to the crankshaft, this movement is changed to a rotary motion which helps drive the vehicle.

1. Chicago Times-Herald race, 1895
   Daytona 500, 1912
2. Indy 500, 1910
   None of the above

In 1895, the Chicago Times-Herald race was the first-ever car race held in the United States. It was won by J. Frank Duryea, the man who built the first automobile in America.

1. Flathead V8
   1.5-liter EcoBoost
2. Inline 6-cylinder
   None of the above

Introduced in 1932, the Flathead V8 was the first affordable V8 engine in the world, which made it more accessible to people struggling through the Great Depression.

1. High tension leads
   Oil filter
2. Fan belt
   Battery

If changing your spark plugs has not stopped the car from idling roughly, the next thing to check is your high tension leads. (Here, "tension" is another word for "voltage.") Always keep these wires free from dampness by spraying WD 40 on the connectors.