The Laboratory Safety Quiz

By: Talin Vartanian
Estimated Completion Time
4 min
The Laboratory Safety Quiz
Image: Reptile8488/E+/GettyImages

About This Quiz

Lab work is full of mixing, experimenting, heating, evaporating and weighing a wide variety of chemicals and substances. Since many of these chemicals are potentially dangerous to humans, it's important to follow proper lab protocols for the safety of yourself, your instructor and your lab members.

This quiz will look at various types of safety equipment, lab rules and regulations, and even types of equipment to use. For example, do you know what a Bunsen burner is? This type of heating vessel produces a flame that is used to heat up a variety of glassware. The glassware sits on top of a ring stand with a wire gauze acting as a barrier in between.

You should also be familiar with what to do during spills and accidents, as well as which types of chemicals help to neutralize certain substances. It's also important to know how to wash and store glassware and the maximum temperature that is used to heat up beakers, flasks and test tubes.

Now that you know a little about what's going to be on this quiz, it's time to test your wits by taking it! Impress your friends by scoring at least 85%!

Which type of accident should you report to your instructor?
Don't report any accidents
Only minor accidents
All accidents
Only major accidents
Correct Answer
Wrong Answer

You should report all accidents to your instructor, no matter how small. This is for the safety of your classmates, the instructor and the class environment.

Which of the following is allowed in a lab?
Horse playing
Chewing gum
Tasting chemicals
Wearing safety goggles
Correct Answer
Wrong Answer

Of the options above, you should always wear safety goggles in the lab. The rest of the answers are prohibited for safety reasons.

What is the proper way to look at what's inside a test tube?
Look at it from the side
Look at it from an aerial view
Look at the bottom of the tube
Peer into the tube as much as you can
Correct Answer
Wrong Answer

The correct answer is to look at the test tube from one of its sides. Students should never peer into the tube, as this can be quite dangerous.

Advertisement

A crucible is supported and held by a _______.
Watch glass
Evaporating dish
Stirring rod
Pipestem triangle
Correct Answer
Wrong Answer

The answer is a Pipestem triangle. It's actually in the shape of a triangle and is used to hold a hot crucible in place. The triangle also has wires that are woven through it.

Which of the following is prohibited in a lab?
Wearing lab aprons
Wearing safety goggles
Eating food
Wearing gloves
Correct Answer
Wrong Answer

The correct answer is eating food. Food and chemicals should never be within the same vicinity. This also goes for drinking soda and juice.

What should you do before leaving the lab?
Note the smell of the chemicals you've been working with
Use soap to wash your hands
Keep your gloves and apron on
Leave the test tubes for your teacher to clean up
Correct Answer
Wrong Answer

Always wash your hands thoroughly before leaving the lab. This is to wash away any potential chemical residue and for hygienic purposes.

Advertisement

Which of these shoes are not allowed in the lab?
Sneakers
Running shoes
Open sandals
Boots
Correct Answer
Wrong Answer

The right answer is open sandals. This is to prevent any chemicals from potentially spilling on exposed skin.

Which of the following is NOT used to describe hazardous waste?
Reactivity
Ignitability
Enzymatic
Toxicity
Correct Answer
Wrong Answer

"Enzymatic" is not used to describe hazardous waste. The other trait, which is missing on this list, is "corrosivity."

When heating up test tubes, where should they be facing?
Toward your teacher
Away from you and other lab members
Toward you and other lab members
Towards the ground
Correct Answer
Wrong Answer

The right answer is away from you and other lab members. For safety reasons, test tubes should never face you (just in case there is a spill).

Advertisement

Why shouldn't water be added to solutions that contain concentrated acids?
It might change color
It could taste bad
It could smell funny
It could splatter
Correct Answer
Wrong Answer

The correct answer is that it could splatter. When water is added to a solution of concentrated acid, the chemicals may start to splatter and strike lab members.

How should you treat a minor burn on the skin?
Put a Band-Aid​ on it
Dip the affected skin in cold water
Apply burn cream
Wash it with soap and water
Correct Answer
Wrong Answer

When treating a burn on the skin, always dip the affected area in cold water. You should then let your instructor know what happened.

What is the proper way to mix acid and water together?
Slowly add the water to acid while stirring it
Slowly add the acid to water while stirring it
Quickly pour the water into an acid solution
Add the acid to water and shake the solution
Correct Answer
Wrong Answer

To properly mix water and an acid solution together, you should slowly add the acid to water while stirring it. This is to prevent any dangerous splattering from taking place.

Advertisement

Solids can turn into powders via a ________.
Micro spatula
Mortar and pestle
File
Funnel
Correct Answer
Wrong Answer

A mortar and pestle is used for pressing down solids into a powder form. The mortar refers to the bowl and the pestle refers to the object that you use to press and mix the solids.

What should you do if your eye is affected by a chemical?
Use an eye wash fountain to thoroughly wash the eye
Put an eye patch over it
Do nothing
Use eye drops to clean out any chemicals
Correct Answer
Wrong Answer

If your eye is affected by a chemical, you should use an eyewash​ fountain to thoroughly wash it. Your instructor should then be notified of the situation.

Which of the following should you NOT do before starting work in a lab?
Use chemicals to sanitize the pan balance
Clean any glassware for use
Wear safety equipment, including goggles, gloves and aprons
Clean the work station
Correct Answer
Wrong Answer

You should never use any kinds of chemicals on a pan balance. You should, however, clean your work station/glassware and wear safety equipment before any kind of lab work.

Advertisement

What is the proper way to smell a chemical in a tube?
You should never smell the chemicals inside of a tube
Place your nose directly above the tube
"Fan" the fumes from the tube and toward your nose (using your hands)
Press your nose to the side of the tube
Correct Answer
Wrong Answer

The correct answer is as follows: Use your hands to create a "fan" motion that will sweep the fumes from the tube and toward your nose. This way, your face is safely away from the tube.

Which of these can you bring into a lab?
Gum
Food
Drinks
Lab notebook
Correct Answer
Wrong Answer

You are allowed to bring a lab notebook into the lab to jot down any notes. Food, gum and drinks are not be allowed due to potential cross-contamination​.

When should you familiarize yourself with the lab procedures?
After lab work is over
Read the procedures while completing lab work
Before you enter the vicinity of the lab
Right after entering the lab
Correct Answer
Wrong Answer

Before you enter the vicinity of the lab, you should already be familiar with any applicable procedures. This is so that work can be completed in a timely and efficient manner.

Advertisement

Which of the following is used to hold hot test tubes?
Funnel
Pipet
Test tube holder
Test tube rack
Correct Answer
Wrong Answer

As its name implies, a test tube holder is used to "hold" test tubes. This is particularly useful when the tubes are too hot to touch.

What is a test tube rack used for?
To heat up test tubes
To mend broken test tubes
To safely hold test tubes that are not in use
To wash test tubes
Correct Answer
Wrong Answer

When test tubes are not in use, they are safely held in place via a test tube rack. This can also be used for reactions in a test tube.

Liquids can be safely heated in a ________.
Wire gauze
Beaker
Funnel
Test tube holder
Correct Answer
Wrong Answer

Beakers are used to safely hold liquids for heating purposes. They come in a variety of sizes and usually come with measurements on the side for accuracy.

Advertisement

You can transfer liquid from one beaker to another by using a ________.
Micro spatula
Stopper
Pipet
Tongs
Correct Answer
Wrong Answer

A pipet is used to transfer liquids from one beaker (or glassware) to another. It's shaped like a long tube and some even have measurements along the side.

Which of the following is used to hold a variety of hot objects?
Tongs
Wash bottle
Dropper
Lab burner
Correct Answer
Wrong Answer

Tongs are used to hold a variety of objects that may be too hot to touch with the human hand. Some of these include flasks and crucibles.

Flasks and beakers can be safely sealed with a __________.
Crucible
Watch glass
Wire gauze
Stopper
Correct Answer
Wrong Answer

A stopper often comes in rubber textures and is used to safely seal a variety of glassware. This is to prevent any potential spills due to accidents.

Advertisement

Which of the following is used to clean test tubes and other types of glassware?
Wire brush
Forceps
Dropper
Pipet
Correct Answer
Wrong Answer

A wire brush, or a spout brush, is used to clean a variety of narrow glassware, including test tubes. It's also long and thin, which is great for cleaning any hard-to-reach crevices.

Which of the following does NOT describe a watch glass?
A vessel that can safely be placed over the top of a beaker
A vessel that is used for measuring temperture
A vessel that can hold liquids for evaporation purposes
A vessel that is used to hold chemicals for weighing or heating
Correct Answer
Wrong Answer

A watch glass is a multi-purpose vessel in the lab that can hold liquids and chemicals for heating, weighing and evaporation. One thing it can't do is measure temperature.

Liquids can be safely stirred by using a ______.
Wash bottle
Micro spatula
Stirring rod
Wire brush
Correct Answer
Wrong Answer

As its name implies, stirring rods are used for stirring purposes. They are also made from glass and are typically about as long as a pencil.

Advertisement

Which of these small tools is used to transfer small substances and powders from one vessel to another?
Dropper
Pipet
Forceps
Micro spatula
Correct Answer
Wrong Answer

Micro spatulas look like miniature scoops that come in a variety of sizes and shapes. They usually have a rounded edge at the end for scooping powders and substances.

If you see "MT" on a piece of glassware, what does that mean?
The glassware needs to be cleaned
A reaction is happening in the glassware
The glassware is empty
The glassware is broken
Correct Answer
Wrong Answer

"MT" sounds like "empty," which is exactly what it means in the context of lab safety. When you see a label that says "MT," it's just a short way of saying the object is empty.

Cylinders should never be heated to a temperature higher than ________.
150°F
125°F
50°F
110°F
Correct Answer
Wrong Answer

The correct answer is 125°F. This is the threshold for heating up cylinders, which should also never drop below 50°F.

Advertisement

Which of the following may be used to replace a Mercury barometer?
Alcohol thermometer
Lauric acid
Copper carbonate
Digital pressure sensor
Correct Answer
Wrong Answer

The mercury that lies within a Mercury barometer is considered to be toxic in a lab. Fortunately, mercury barometers may be replaced with a digital pressure sensor.

Which of the following is known to be a carcinogen?
Carbon disulfide
Asbestos
Anthracene
Chlorine
Correct Answer
Wrong Answer

The correct answer is asbestos, which is a known carcinogen. A carcinogen is potentially lethal to humans because it is known to cause cancer.

If you spill acid on the ground, which of the following should you use to neutralize it?
Sodium hydrogen carbonate
Nitroparaffin
Oxalic acid
Potassium chlorate
Correct Answer
Wrong Answer

Another fancy way of saying baking soda is "sodium hydrogen carbonate," which is used to neutralize acids. This should be used during an acid spill on the ground, but not on human skin.

Advertisement

Which of the following is NOT one of the colors of the NFPA hazard diamond?
Blue
Green
Yellow
White
Correct Answer
Wrong Answer

The correct answer is green. The NFPA stands for National Fire Protection Association, which includes a handy hazard diamond key that indicates various colors and their association to potential hazards. Those colors are blue, yellow, white and red. Green is not one of them.

A 'titration flask' is also known as ________.
A Florence flask
A Volumetric flask
An Erlenmeyer flask
A Büchner flask
Correct Answer
Wrong Answer

The Erlenmeyer flask was invented by Emil Erlenmeyer. It is also known as 'titration flask.' The bottom of this flask is wide, which gradually narrows toward its neck.

You Got:
/35
Reptile8488/E+/GettyImages