Image: Shutterstock
About This Quiz
Car engines need gasoline, just like you need food. It's science! But in this quiz, we’re going to take things to the extreme and test your knowledge about engine facts that you probably don’t know. Do you feel challenged yet? Good, you should.Â
The internal combustion engine is one of the great marvels of the modern world. As with any remarkable innovation or invention, it has a history, and the facts really do boggle the mind. When you’re done with this quiz, you’re going to listen to the hum of that engine in that car of yours with a whole new kind of awe and respect.
And let’s be honest, truly knowing the facts about what lies under the hood is important. For instance, did you know that the principle behind any reciprocating internal combustion engine is to put a tiny amount of high-energy fuel in a small space and ignite it, thus releasing an incredible amount of energy in the form of expanding gas? The energy that is released from an engine is enough to propel a potato 500 feet. And, that potato might just hurt someone...just saying.
Were you aware that the four-stroke combustion engine is also known as the _____ cycle? Named after Nikolaus _____ who invented it in 1867? You’re salivating now, aren’t you? Let’s get started.
What kind of fuel would power a two-stroke engine?
A mix of water and alcohol.
A mix of oil and gasoline.
Because two-stroke engines are a simpler design, the oil must be mixed in with the fuel to lubricate the parts. The power-to-weight ratio in a two-stroke engine is often much higher. Two-stroke engines tend to be less efficient but lighter.
Avtur.
Diesel fuel.
Advertisement
Which of the following two-stroke engines is generally water-cooled instead of air-cooled?
A weed eater.
An outboard motor.
Outboard motors are for propelling boats through the water. They use the water to cool them instead of air.
High-octane gasoline.
Diesel fuel.
Advertisement
What is “firing order?"
It is the order in which the furnaces in a coal power plant are started after maintenance.
It is a complex formula that enables you to determine whether or not a car engine will misfire.
It is the order in which a spark plug ignites each cylinder in an engine block.
The firing order of an internal combustion engine gives the order each cylinder is sparked to ignite the fuel. It is created to reduce lost power through vibration and other engine shifting.
It is the order the wheels on a train start moving.
Advertisement
Which of the following is not an electric motor?
The engine on a miter saw.
The engine on a kitchen blender.
The engine on a steam engine.
The steam engine operates on combustion, not electricity. All of the others use small electric motors to convert electricity into mechanical power.
The engine on a computer disk drive.
Advertisement
Which engine uses fuel and an oxidizer to make up the propellant?
A jet engine.
A marine engine.
A rocket engine.
Rocket engines are internal combustion engines that work by expelling a gas that is the result of high-pressure combustion of propellants. The propellants must contain a fuel and the oxidizer (or grain) for that fuel.
A two-stroke engine.
Advertisement
Another name for a gas turbine engine is?
A windmill.
A jet engine.
A jet engine is also known as a gas turbine engine. As gas is burned, it creates an air flow that spins turbines to create thrust.
An oil jack.
A generator.
Advertisement
A two-stroke engine would not work for which of the following?
To power an average car.
Although highly efficient, two-stroke engines burn a lot of oil. In addition to paying for gas, you would need to purchase about a half-gallon of two-stroke oil for every tank of fuel.
To power a dirt bike.
To power a chainsaw.
To power a lawnmower.
Advertisement
An internal combustion engine would be good for what?
Powering a train with steam.
Powering a submarine with heated air.
Creating electricity in a coal power plant.
Using diesel to power a car.
A diesel engine ignites the fluid inside the engine. Coal power plants, trains, and submarines are all heating the air or water outside of the engine to drive the piston.
Advertisement
What is the purpose of afterburners on jet engines?
To reduce pollution.
To increase thrust.
Afterburners are generally equipped on military aircraft to increase thrust during combat situations, takeoff, and supersonic flight. They work by introducing additional fuel into the pipe after the turbines. Afterburners are only meant to be operated for short periods of time because they consume large amounts of fuel.
To decrease drag.
To increase lift.
Advertisement
What happens during the power phase of the four-stroke internal combustion engine cycle?
The compressed gas is ignited, pushing the piston downward.
During the power phase in a four-stroke internal combustion engine, the piston moves downward after the gas in the chamber is ignited. The explosion creates the power that drives the piston through the rest of the cycle.
The piston moves upward and pushes the gas into the exhaust system.
The piston moves upward and compacts the gas.
The piston moves downward and pushes the gas into the exhaust system.
Advertisement
What is the primary disadvantage of a two-stroke internal combustion engine?
They create more pollution.
The main disadvantage that two-stroke engines have is that they burn the oil mixed in with their fuel, which increases pollution. They are simpler, lighter, and more efficient than four-stroke engines.
They are extremely complex.
They are thermally inefficient.
They are much heavier than four-stroke engines.
Advertisement
A fan, compressors, combustion chamber, turbine, and nozzle are parts of which engine?
A radial engine.
A rotary engine.
A chemical rocket engine.
A turbojet.
Although all internal combustion engines contain combustion chambers, turbines are unique to the turbojet. Jet engines pass air or water in the opposite direction of the desired motion using Newton's third law of motion.
Advertisement
One type of piston-less internal combustion engine is called what?
Rankine.
Diesel.
Wankel.
The center of the Wankel engine (or rotor) rotates around a stationary gear inside the housing. The rotor is continuously moving in the same direction and driving the stationary gear forward.
Radial.
Advertisement
What is one definition of an engine?
A machine that changes mechanical energy into chemical energy.
A machine that uses fuel.
A machine that changes heat energy into mechanical motion.
An engine is a machine that converts energy, such as heat energy, into mechanical motion. The concept of an engine was first proposed in the 17th century.
A machine that turns a crankshaft.
Advertisement
Hybrid cars use gas engines for what?
To recharge the batteries.
To power low, continuous speeds.
To aid in fast acceleration.
A and C.
The gas engine in a hybrid car not only recharges the batteries but also improves acceleration and kicks in for higher speeds. The electric motor operates alone during lower speeds and slow acceleration.
Advertisement
An external combustion engine would be best used for powering what?
A train steam engine.
External combustion engines use heat to power the piston, but the fire does not have direct contact with the piston. Steam engines are one example of this.
A hybrid car.
A jet airplane.
A modern farm tractor.
Advertisement
What is one thing an external combustion engine might use to move the piston?
Steam.
External combustion engines use a working fluid, such as steam, to move the piston. The heat source is outside of the engine.
Fire or explosions.
Electricity.
Turbines.
Advertisement
A radial engine would be best used in which vehicle?
A steamroller.
An airplane,
The first successful rotary engine was designed in 1908. The design of the rotary engine aids in spinning propeller blades.
A paddle boat.
A passenger van.
Advertisement
Generally, engines that run only on electricity are called what?
Electro-magnets.
Hybrids.
Motors.
By definition, "engine" and "motor" both are used as machines that power other devices. However, "motor" is generally used when the power comes from electricity instead of combustion.
Pumps.
Advertisement
Which of the following is not a current hybrid engine combination?
Turbo-electric.
Biomass-electric.
Although biomass is used to generate electricity, as of yet there are no biomass-electric hybrids in mass production. Turbines, petroleum, and diesel are all used in currently produced hybrid engine systems.
Petroleum-electric.
Diesel-electric.
Advertisement
Which of the following is not an internal combustion engine type?
Diesel.
Radial.
Stirling.
All of the types except the Stirling are internal combustion engines. Diesel engines do not use spark plugs. Rocket engines are specialized jet engines. Radial engines are used to rotate the propellers in airplanes.
Rocket.
Advertisement
Which of the following are types of two-stroke engines?
Reciprocating, uniflow, turbine, and oscillating.
Reed inlet, rotary inlet, piston-controlled inlet, and uniflow-scavenged.
Although different oil delivery systems can cause variation between two-stroke engines, the main differences are based upon the gas inlet systems. Piston-controlled is the standard engine that uses the piston to control the intake.
I, V, W, and U.
Griffin, Dyer, Velozeta, and Beare head.
Advertisement
Who is credited with inventing the first steam-powered submarine?
Richard Trevithick.
Robert Fulton.
Robert Fulton was fascinated with steam engines and used one to power the first successful submarine, called the Nautilus, in the late 18th century. He went on to develop steam-powered torpedoes for Britain.
Caleb Willow.
Thomas Newcomen.
Advertisement
Robert Sterling invented what kind of external combustion engine?
The Sterling engine.
Robert Sterling invented the Stirling engine in 1816. It was an external combustion engine that used air instead of steam to move its pistons. The Sterling engine was safer (although prone to higher failure rates) and more efficient than steam engines of that era.
The Naptha engine.
The Organic Rankine engine.
The high-pressure steam engine.
Advertisement
Which internal combustion engine is also called a "star" engine?
A jet engine.
A six-stroke engine.
A radial engine.
The radial configuration is generally five pistons radiating out from a central point (the crankshaft). When viewed from the front, it resembles a star of sorts, and that is how it got its name.
A Wankel engine.
Advertisement
What is the purpose of a nozzle on a rocket engine?
To prevent the exhaust from escaping with the propellant.
To direct the propellant into the combustion chamber.
To direct the spark into the combustion chamber.
To accelerate the gas exhaust.
Nozzles on rocket engines allow the hot gasses to escape but accelerate the speed of the exhaust. Half of a rocket's thrust comes from the pressure created by the nozzle.
Advertisement
Which of the following is not a major type of electric motor?
Magnetic.
Piezoelectric.
HAWT.
Magnetic motors are used the most. Electrostatic motors operate based on electrical charge attraction and repulsion, and piezoelectric motors are based on the principals of electric charge that accumulate in certain materials and vibration frequencies. HAWT (Horizontal Axis Wind Turbine) is a wind turbine not an electric motor.
Electrostatic.
Advertisement
What was the Stanley Steamer?
An automobile.
The Stanley Motor Carriage Company produced steam vehicles in the early 20th century. It was founded by twins, Francis E. Stanley and Freelan O. Stanley. Francis died in 1918 in an automobile accident while trying to avoid two farm wagons and the company was sold.
A train.
A vacuum.
A boat.
Advertisement
What shape is the rotor on a Wankel engine?
It is cylindrical.
It is a perfect sphere.
It is similar to a Reuleaux triangle.
The Reuleaux triangle is based on an equilateral triangle with bulging sides that create a constant curve. The Wankel engine uses sides that are slightly flatter than an official Reuleaux triangle.
It is an ellipsoid.
Advertisement
What is the difference between the Rankine cycle and the Otto cycle?
The Rankine cycle is used to describe a spark engine, and the Otto cycle is used to describe a fluid that changes phases.
The Rankine cycle is the ideal for external combustion engines, and the Otto cycle is the ideal for spark-ignition engines.
The Otto cycle is used to ideally describe a situation where the working gas remains a gas constantly such as in spark-ignition systems. The Rankine cycle is the ideal in situations where the working fluid changes between gas and liquid states.
The Rankine cycle is used to describe low mass fluids, and the Otto cycle is used to describe high mass fluids.
The Rankine cycle is the ideal for spark-ignition engines, and the Otto cycle is the ideal for gas-turbine engines.
Advertisement
Rotary and radial engines are both used in older propeller airplanes, but what is the difference between the two?
Radial engines have a rotating crankshaft; the crankshaft of rotary engines is fixed.
A rotary engine rotates around a central, fixed shaft. It is for this reason Wankel engines are also called rotary engines, even though this term traditionally was applied to engines that spin, or rotate, with an airplane propeller.
Radial engines do not overheat as easily as rotary engines.
Radial engines were only useful until the 1920s, when drag limited power output.
The radial engine has the pistons facing the central point; they point outward on a rotary engine.
Advertisement
Which one is not an internal combustion engine?
Solid rocket.
Cold gas thruster.
Cold gas thrusters operate like a balloon with the air being released. They provide low performance but can be useful for making minor adjustments to a space shuttle's course.
Turborocket.
Hybrid rocket.
Advertisement
What is a disadvantage of a Wankel engine?
It is heavier than a piston engine.
It is more expensive to mass produce.
Poor fuel economy.
Although running the engine at a constant speed overcomes fuel consumption issues, under normal operating conditions it consumes more fuel than what should be ideal. Linked to its poor fuel economy is also poor emission quality.
It is three times as large as a piston engine with an equal output.
Advertisement
What was the Naptha engine developed to power?
Trains.
Bicycles.
Commercial airplanes.
Personal watercraft.
After several boiler accidents on steamboats, laws were enacted that required an engineer to be present on all steamboats. The Naptha engine, although equally dangerous, was developed so the owners of personal watercraft could get around this law.
Advertisement
What was the name of the first passenger car that used an external combustion engine?
The Oruktor Amphibolos.
The Model A.
The Steam Velocipede.
The Puffing Devil.
The Puffing Devil was invented by Richard Trevithick in 1801. The first one was left unattended and running by its operators, and it self-destructed. By 1803, Trevithick had improved his design, but the London Steam Carriage never became popular.
Advertisement
You Got:
/35
